New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Windows & Doors in Austin, TX | Juniper Windows Austin
We provide independent ECO Window Systems window and door service throughout Austin, from Mueller to Spicewood Springs and everywhere between. We’re not manufacturer-authorized or a factory dealer, and we’ll tell you that straight. What makes our ECO work different here is simple: Austin’s heat, hail, and housing stock create specific failure patterns in these frames and seals, and we fix them based on what actually happens on your street, not what a brochure says. Call (325) 420-1750 for a free estimate on any ECO Window Systems repair or replacement.
Why Austin Residents Choose Us for ECO Window Systems Service
Sean Mackey, owner at Juniper Windows Austin, learned the trade at Los Angeles Trade-Technical College before spending years focused on how windows actually perform, not just how they look in a showroom. That matters for ECO Window Systems owners in Austin because these products have specific quirks after ten or twenty years in Texas conditions. We’ve pulled apart enough fogged ECO 70 Series sashes and worn 3-lite sliders to know what’s repairable and what’s throwing good money after bad.
Our ECO Window Systems sales & service teams carry OEM-equivalent weatherstripping, balance systems, and rollers matched to original ECO profiles. When you book through us, the Relay Standard applies: written price before work starts, live arrival time you can track, before-and-after photos, and a digital invoice. Every job is covered by the 365-Day Done Right Promise, parts and labor, in writing.
Common ECO Window Systems Windows & Doors Problems We Solve in Austin
- Seal failure and fogging on early ECO double-pane units. Austin’s repeated 100°F+ thermal cycles expand and contract the glass package until the seal lets go. You’ll see haze between the panes that won’t wipe off. We can source replacement IGUs for many ECO models, or swap in an insert when the sash is too far gone.
- Vinyl frame warping at corners on dark-colored ECO 70 Series windows. South and west exposures without shade take brutal afternoon sun here, and dark vinyl absorbs it. The corner welds can twist enough to break the weather seal and make the sash bind. We see this constantly on 1980s and 90s two-story homes near Spicewood Springs Road and along Loop 360.
- Roller and track wear on 3-lite ECO sliding doors. Mueller-area homes cycle these doors daily to open onto their small backyards, and that’s a lot of rolling. The factory rollers wear flat, the track picks up grit, and the door starts grinding. We replace rollers with OEM-equivalent parts and re-align the track so it glides again.
- Hardware corrosion and stiff operation on ECO casement windows. East Austin bungalows often lack roof overhangs, so driving rain hits the window hardware directly. Cranks get stiff, hinges corrode, and the sash won’t seat tight. We rebuild or replace the operator assembly and re-lubricate with a dry film that won’t attract Texas dust.
- Failed weatherstripping letting dust and heat through. Austin’s cedar pollen and fine Hill Country dust find every gap. Original ECO weatherstripping from the 90s compresses flat after years of heat. We re-gasket frames and sashes with profiles that match the original extrusion so the window closes tight again.
ECO Window Systems Service in Austin: What Local Conditions Mean for Your Equipment
Here’s something that’s true in Austin but not in Round Rock, not in San Antonio, and definitely not in Houston. Austin’s Mueller development and several East Austin redevelopments have strict shade tree and impervious cover rules. Homeowners have to preserve or replace significant trees and cap how much of the lot gets covered by buildings and concrete. That leave you with a compact house and a small backyard, and the only way to feel like you have space is to open the back wall completely with the largest sliding or folding door you can fit. In Mueller, three-panel ECO sliding doors on a 300-square-foot yard are normal. And that means daily cycling, direct sun on the track, and dirt from a tiny yard grinding through the rollers three times a day. We replace track and roller sets on ECO 3-lite doors in Mueller more in a single summer than we do on similar doors in Cedar Park in three years. If your ECO slider is getting harder to open, don’t wait until a roller seizes. Call (325) 420-1750 and we’ll come look.
ECO Window Systems Models & Products We Service in Austin
We service the full ECO Window Systems residential lineup: ECO 70 Series, ECO 45 Series, ECO Classic, and ECO ProView. That includes single-hungs, double-hungs, casements, picture windows, and the 3-lite sliding doors that show up all over Mueller and East Austin. For discontinued ECO lines, we source OEM-equivalent weatherstripping, balance systems, and rollers from vetted aftermarket suppliers that match original profiles. We repair first when the frame is square and the glass pack is intact. When the frame has warped, the seal has failed twice, or the glass isn’t worth saving, we recommend our Window Replacement in Austin or an insert with an energy upgrade rather than another repair cycle.
ECO Window Systems Service Pricing in Austin
Most ECO Window Systems repairs in Austin land between $180 and $340 for common fixes like roller replacement, weatherstripping, or hardware rebuilds. Fogged glass replacement runs $140 to $280 per pane, depending on the glass package and whether it’s an ECO 70 or ECO Classic unit. A full insert window replacement for an ECO window in Austin typically runs $900 to $1,500 per opening, installed, when the frame is still square and the opening is standard. If you’re replacing a 3-lite ECO sliding door with a new multi-slide unit, expect $3,800 to $6,500 depending on glass options and site conditions. What drives cost here is exposure: a west-facing ECO 70 Series that’s warped at the corners needs more labor than a north-facing unit in the same house. Every estimate includes a written line-item price before work starts. Call (325) 420-1750 and Sean’s team will give you an exact number.
Serving Austin, TX - Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – ECO Window Systems Windows & Doors in Austin
In most cases, yes. If the frame is square and the sash wasn’t warped by sun exposure, we can replace the IGU (insulated glass unit) in the original sash. That’s $140 to $280 per pane depending on the glass package. If the sash has also warped at the corner, which we see on west-facing Austin exposures, a replacement insert makes more financial sense. Call (325) 420-1750 for an exact quote.
Mueller’s compact lots mean your back door opens onto a small yard and gets cycled more times per day than a suburban slider in Cedar Park would cycle in a week. Track grit, direct sun, and daily use destroy factory rollers fast there. We replace them with OEM-equivalent rollers and align the track to reduce wear. If it’s an every-year problem, we may recommend Austin Window Installation of a multi-slide unit with a heavier roller system altogether.
Not usually. Most ECO frames in Austin are standard residential vinyl extrusions, not built for the thickness and weight of true impact-rated glass. Austin hail doesn’t require coastal impact ratings either. A better upgrade here is a laminated or low-E package that handles UV and hail better than the original. Sean’s rule: if the numbers don’t back it up, he’s not going to sell it to you.
The trim fading isn’t window failure, it’s UV damage to interior finishes. The window itself may still be doing its job. But a 1985 ECO picture window almost certainly has little or no low-E coating, so it’s letting heat load into your living room every afternoon. We’d check the seal and frame for sun damage, then give you options: re-glaze with a modern glass package or replace the unit outright. Free estimate covers all of it.
Yes, and settled foundations are a real factor in those neighborhoods. When a bungalow settles, the rough opening shifts slightly and a casement that used to latch clean now binds. We can rebuild the operator assembly, re-shim the sash, and adjust the striker so it closes properly. If the frame is too racked to hold a seal, we’ll say so and quote a replacement rather than taking your money for a repair that won’t last.
Service Areas Near Austin
Based in Austin, we also serve neighborhoods and cities throughout the area. Our Austin service area includes Mueller, Hyde Park, Allandale, Spicewood Springs, and everything inside the city limits. For homeowners north and south of town, we offer ECO Window Systems service in Cedar Park and ECO Window Systems service in Lockhart. We also cover Lakeway, Brushy Creek, and Wells Branch.
Book Your ECO Window Systems Service in Austin Today
Call (325) 420-1750 for a free ECO Window Systems estimate in Austin. We’ll put the price in writing before anything starts, and you’ll get a live arrival time on the day of service. No estimate that turns into a surprise invoice.
Written by Sean Mackey, Owner at Juniper Windows Austin, serving Austin since 2001.
Six Reasons Homeowners Choose Juniper Windows Austin
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.