New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Windows & Doors in Cedar Park, TX | Juniper Windows Austin
We provide Cedar Park Window Replacement and independent Therma-Tru door service across Cedar Park, TX. The thing that makes our Therma-Tru work different here is that we know exactly how Cedar Park’s limestone clay and west-facing afternoon heat punish these specific door slabs. If you’ve got a Therma-Tru door that’s cracking, dragging, or rusting in a way your neighbor in Round Rock doesn’t see, call (325) 420-1750 for a free estimate.
We’re not a factory-authorized dealer, and we won’t pretend to be. What we are is a local crew that has been servicing Therma-Tru entry doors, patio doors, and steel door lines through our Window Installation in Cedar Park since the early 2000s. Sean Mackey and our technicians have pulled apart enough Classic-Craft slabs and Pulse Series rollers in this town to know which failures are product issues and which ones are Cedar Park soil and sun doing what they do.
Why Cedar Park Residents Choose Us for Therma-Tru Service
Therma-Tru builds a good door. But a good door installed on Cedar Park’s expansive clay and baked by a Texas summer will still fail in predictable ways. That’s where we come in.
We stock the sealants, weatherstripping, hinge kits, and roller carts that match Therma-Tru’s exact door profiles. When a Classic-Craft door in Buttercup Creek starts showing hairline cracks on the fiberglass skin, we don’t just caulk it and hope. We check the frame for racking, inspect the hinge pockets, and tell you whether the fix is a rebuild or a replacement. Sean learned the trade at Los Angeles Trade-Technical College and has spent decades focused on how windows and doors actually perform, not how they look in a brochure. He’ll tell you if the numbers don’t back up a repair. We’d rather lose a small job than sell you a patch that fails next spring.
Every job gets a written price before any work starts. That’s our 365-Day Done Right Promise: if it’s not right, we make it right, parts and labor, for a full year after installation. No vague estimates, no surprise invoices.
Common Therma-Tru Windows & Doors Problems We Solve in Cedar Park
- West-facing Classic-Craft fiberglass doors with hairline skin cracks. Cedar Park’s afternoon heat soak hits west walls hard. The outer fiberglass skin micro-cracks, moisture wicks behind the slab, and the frame corner joints swell. In neighborhoods like Buttercup Creek, we see this pattern on homes built in the early 2000s, always on the same wall orientation.
- Smooth-Star door saddles pulling loose on the hinge side. The clay soil under Cedar Park slabs expands in wet springs and contracts in summer. That movement loosens sill caps and saddles, creating a gap that pulls in drafts and lets roaches walk straight into the hallway. We reset the saddle and seal it properly.
- Pulse Series sliding panels jumping their lower rollers. Original patio slab pours in Buttercup Creek flex at the center expansion joint. Therma-Tru’s adjustable roller cams can’t hold level under that repeated racking, so the panel drags or jumps. We replace the roller carts and re-level the track.
- Benchmark steel doors rusting along the bottom hem. Homes near Bell Boulevard, especially 1970s and 1980s ranchers, get daily sprinkler overspray hitting the door bottom. After a February freeze pops the weatherstrip gaskets, water sits in the hem and rust blooms. We clean the rust, treat the steel, and install new gaskets.
- Fogged glass in Therma-Tru door lites and sidelites. Cedar Park’s humidity and temperature swings stress the seal between panes. Once that seal fails, the glass fogs permanently. We replace the insulated glass unit rather than the whole door when the frame is still sound.
Therma-Tru Service in Cedar Park: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic Therma-Tru page. In Cedar Park, Therma-Tru entry doors on homes built in the 2000s fail at the exact same wall orientation: west-facing fiberglass slabs develop hairline skin cracks from afternoon heat soak, then limestone dust from nearby construction sites grinds into the gelcoat and turns them chalky gray. This is a wear pattern we don’t see in Round Rock or Leander. The limestone dust is the differentiator. Cedar Park sits on limestone-rich soil, and when construction kicks up dust, it settles on door surfaces. Heat softens the gelcoat just enough for that fine dust to embed. Ten years later, the door looks chalky and cracked, and the homeowner assumes the product failed. It didn’t. The environment did. We can restore the surface and reseal it, but only if the frame hasn’t racked from the same soil movement. That’s the check that matters.
We pulled a Classic-Craft double door in Buttercup Creek where the inactive slab had sagged a full quarter inch, eating the top weatherstrip and letting cedar pollen drift into the foyer. The hinge screws were stripped in the jambs from the constant frame racking those limestone lots are known for. We rebuilt the hinge pockets with epoxy and longer stainless screws, then set a fresh OEM sweep and realigned both leaves. That door now closes with one finger, even after this spring’s clay swell.
Therma-Tru Models & Products We Service in Cedar Park
We service the Therma-Tru lines Cedar Park homeowners actually have: Classic-Craft Fiberglass Entry Doors, Smooth-Star Fiberglass Doors, Pulse Series Patio Doors, and Benchmark by Therma-Tru Steel Doors. Our default is genuine Therma-Tru weatherstrip, sweeps, hinge sets, and roller carts whenever they’re still in production, because those seals are molded to the exact door profile. For discontinued or backordered parts, we install proven aftermarket hardware like AmesburyTruth roller assemblies or Endura threshold caps.
We don’t stock parts for every Therma-Tru generation ever made. But we know which ones are still on Cedar Park homes and we keep the common failure items on hand for faster turnaround. If you need a full frame replacement, we handle that too. For more on how we work with this brand across the region, see our Therma-Tru sales & service page.
Therma-Tru Service Pricing in Cedar Park
Most Therma-Tru service calls in Cedar Park run between $125 and $450, depending on what’s actually wrong. Here’s how that breaks down:
- Weatherstripping or sweep replacement: $125-$225 per door, including parts
- Threshold or sill cap reset: $175-$325, including sealant and fasteners
- Sliding door roller replacement (Pulse Series): $200-$375 per panel, depending on track condition
- Fiberglass skin repair and reseal (Classic-Craft): $300-$550, if the frame is still square
- Full frame door replacement: $1,800-$4,200, depending on size, glass, and hardware
What drives the cost is whether the frame has racked from soil movement. A door that’s failed only at the seal is a fast fix. A door whose frame has been torqued by Cedar Park clay needs more work. Our free estimate tells you which situation you’re in. Call (325) 420-1750 and we’ll come look.
Serving Cedar Park, TX - Our Local Coverage Area
We’re based in the Cedar Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Windows & Doors in Cedar Park
The chalky gray look comes from limestone dust grinding into the gelcoat after afternoon heat softens the fiberglass surface. This is specific to Cedar Park’s west-facing walls combined with construction dust from our limestone-rich soil. We can often restore the surface and reseal it, but first we check whether the frame has racked from the same heat and soil movement. If the frame is still square, a skin repair makes sense. If it’s racked, replacement is the honest recommendation. Call (325) 420-1750 for a free inspection.
In Cedar Park, the usual culprits are rain splashback off the stoop, condensation from humidity cycles, or a neighbor’s sprinkler overspray. February freezes pop the weatherstrip gaskets, and then water sits in the bottom hem. We clean the rust, treat the steel, and replace the gaskets with the correct Therma-Tru profile. If the rust has eaten through the hem, we’ll tell you straight that replacement beats a patch.
Most of the time, weatherstripping alone fixes it. We only recommend rehanging when the slab has sagged enough to strip the hinge screws or the frame has racked from soil movement. We’ll measure the gap and the reveal before we touch anything.
Probably not the door’s fault. Cedar Park’s clay soil expands in wet springs, and the slab under your stoop moves. That movement pulls the sill cap loose. Therma-Tru’s warranty covers manufacturing defects, not soil movement. The fix is a sill cap reset and reseal, which we do for $175-$325. Call (325) 420-1750 and we’ll confirm what’s happening before you file a claim.
The slab under your patio door flexes at the expansion joint when the clay absorbs rain. That flex knocks the roller cams out of level, and the panel drags. We replace the roller carts and re-level the track so the panel rides smooth again. It’s a $200-$375 fix, and we can usually do it same visit. Call (325) 420-1750 for an exact quote.
Service Areas Near Cedar Park
We service Therma-Tru doors and windows throughout the Cedar Park area, including Cedar Park service area, Brushy Creek, Wells Branch, Lakeway, and parts of Austin. If you’re south of Cedar Park, see our Therma-Tru service in Austin page. If you’re further out toward Lockhart, check our Therma-Tru service in Lockhart page.
Book Your Therma-Tru Service in Cedar Park Today
If your Therma-Tru door is showing any of the patterns we described above, don’t wait for the next freeze or the next hailstorm. Call (325) 420-1750 and we’ll schedule a free estimate. A real person answers, every time, 24/7.
Written by Sean Mackey, Owner at Juniper Windows Austin, serving Cedar Park since the early 2000s.
Six Reasons Homeowners Choose Juniper Windows Austin
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.