New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Door Installation: The Austin Owner’s Guide
We stock and install Mr-Glass door units and replacement parts across Austin, with most door replacements running between $1,800 and $4,200 installed depending on model, size, and frame condition. We keep common Mr-Glass rollers, tracks, and lock sets on the truck, so a good number of repairs wrap up in one visit. Most Austin homeowners discover a problem the same way: the door starts dragging, the lock stops catching cleanly, or a corner of the frame pulls away from the wall after a few hard Texas summers.
If you’re reading this with a Mr-Glass door that’s fighting you every morning, here’s exactly what you need to know to get it fixed without guessing and without a quote that changes at the door.
Which Mr-Glass Models This Applies To
We work on the full Mr-Glass residential line, including their sliding patio doors, hinged French units, and the multi-panel stacking systems that show up in a lot of Austin’s newer builds around Mueller and East Austin. The compatibility gotcha worth knowing: Mr-Glass sliding doors from roughly 2015 and later use a narrower roller profile than the older units, and swapping in the wrong roller will score the track within a month. We match parts by measuring the roller diameter and the track opening on site, not by guessing from a photo.
For most hinge and lock components, Mr-Glass uses standard commercial extrusions that accept quality aftermarket equivalents without issue. For glass packs and frame gaskets, we recommend genuine Mr-Glass or an exact-spec match. The Texas sun degrades off-brand gaskets fast; you’ll see cracking and air leaks in two summers instead of ten. Every door gets checked against the label on the hinge stile, which lists the model code and glass spec, so the right part goes in the first time.
Signs Your Mr-Glass Door Installation Is Failing
- The door suddenly drags or needs a shoulder to close. That’s almost always a roller bearing that’s given up, usually after years of Austin dust working its way into the track. You’ll see flat spots on the wheels when we pull the panel.
- You can see daylight or feel air moving around the door frame. Gaskets and weather seals harden and shrink in high heat. By the time you feel a draft, the seal has lost most of its compression.
- The lock turns but the bolt won’t sit home in the strike plate. Frame settlement or a sagging panel shifts the alignment a few millimeters. Forcing the lock just wears out the gear inside the mechanism.
- Water puddles on the interior sill after a hard Austin storm. The weep system is clogged or the sill gasket has torn. Left alone, the threshold starts to corrode underneath.
- The door binds at the top corner while the bottom gap looks fine. The header or side jamb has moved. We see this a lot on south-facing installs where the afternoon heat cycles work fasteners loose over time.
Replacement Cost & What’s Included
In Austin, expect to pay between $1,800 and $4,200 for a full Mr-Glass door replacement installed, with sliding units on the lower end and multi-panel stacking doors at the top. Component-level repairs run lower: roller replacement is typically $180 to $340 per panel, lock sets and strike alignment $120 to $260, and full re-gasketing $350 to $700 depending on the door size. The price can move based on panel dimensions, custom glass specs, and whether the frame itself needs to be pulled and reset.
Every quote is a written, line-item price before any work starts. Parts are listed separately from labor, and that number doesn’t move once you approve it. The work is covered by our 365-Day Done Right Promise, parts and labor, in writing. If a repair fails within that year, the second visit is free, no argument.
DIY or Call Us?
Some things on a Mr-Glass door you can check safely: clear the track with a vacuum, inspect the weatherstrip for obvious tears, test whether the rollers are adjustable with a wrench. That’s about where we’d stop. Adjusting door rollers under tension without the panel supported is how glass gets cracked and fingers get pinched. Same caution applies to the multi-point lock assembly; if the internal gear train strips, the whole door has to come down to replace it properly.
If you’ve narrowed it to a roller or a gasket and want it done right the first attempt, call (325) 420-1750. Sean Mackey and the crew will match the part to your exact panel, give you a written price on site, and leave the door operating the way it did on day one.
FAQs
Expect 15 to 20 years from the frame and glass with proper maintenance, while rollers, seals, and lock mechanisms typically need service every 5 to 8 years in Austin’s heat and dust. Call (325) 420-1750 if your door is older than that and losing smoothness.
Yes, most component failures are repairable, including roller swaps, gasket replacement, and lock set rebuilds. Full replacement makes sense when the frame is corroded, the glass seal has failed, or the original installation was poorly executed.
A standard single-panel sliding door swap takes one day including rough opening prep and trim work. Multi-panel stacking units run two to three days depending on the opening count.
We carry the most common rollers, lock bodies, gaskets, and door sweeps on the truck for immediate repair across Austin, and we order exact-match components for non-standard models with clear lead times before we schedule the work.
Written by Sean Mackey, Owner, Juniper Windows Austin at Juniper Windows Austin, serving Austin and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Austin
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.