VLX 100 Swing / Entry Door

VLX 100 Swing / Entry Door in Austin, TX | Juniper Windows Austin

The VLX 100 Swing / Entry Door is a modern aluminum entry door built for homeowners in Austin who want a clean, minimalist front entry without sacrificing security or energy performance. It’s a single swing door with a slim frame profile and a multi-point locking system that engages at three points along the jamb when you lift the handle. Juniper Windows Austin is an authorized ViewLux installation partner, which means you get the product backed by an install team that works to the AAMA standards the manufacturer requires. If you’re considering this door for a new build or a front-entry remodel in Austin, call us at (325) 420-1750 to talk through finishes, glass, and lead times.

Call (325) 420-1750

Product Overview – VLX 100 Swing / Entry Door

The VLX 100 is the entry door you choose when the door should read as architecture, not ornament. The frame is extruded aluminum with a profile width of 2.56 inches, which is lean enough to let glass dominate the opening while still providing a rigid structural core. The wall thickness of the aluminum extrusion is 0.098 inches, a heavier gauge than what you typically see on patio sliders in this price class, and that mass is what keeps the panel square over years of Austin sun and humidity cycles.

What draws buyers to this series is the single-panel swing configuration. It works as a primary front door, a side entry off a carport, or a back door opening onto a patio. The minimalist frame means the sightlines stay open, which matters in Austin where transitional and modern farmhouse exteriors dominate new construction. We install these in neighborhoods from Mueller to Steiner Ranch to East Austin bungalows. The multi-point locking hardware is European style, engaging the top, middle, and bottom of the panel into the frame with a single throw of the handle. That’s not just a security feature, it changes the feel of the door when it closes. Solid. Precise. No rattle.

Because the panel and frame are both aluminum with a thermal break, you get a door that doesn’t warp, doesn’t swell in the humidity, and doesn’t lose its shape the way wood or fiberglass entry doors can after a few Austin summers. It’s a door built for how we live here: heat, hard sun, and air conditioning on the other side.

Technical Specifications

Here are the core numbers and options for the VLX 100 as we order and install it for Austin homes:

• Frame wall thickness: 0.098 inches, extruded aluminum
• Frame profile width: 2.56 inches visible frame face
• Maximum panel span: Up to 48 inches wide, single panel, swing configuration
• Glass options: Clear, Frosted, Obscure, Low-E, Tempered, Laminated
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Retractable screen or no screen
• Locking system: Multi-point, engaging top, center, and bottom of the panel
• Thermal performance: Thermal break technology, NFRC-rated for energy performance
• Glass upgrade path: Impact-resistant laminated glass available for wind-load and storm zones

If a dimension or configuration isn’t listed here, ask us. We can order custom widths up to the 48-inch maximum and adjust hardware finishes to match adjacent exterior lighting or door hardware.

Performance Features

Thermal Efficiency – The VLX 100 uses a polyamide thermal break between the interior and exterior aluminum profiles. That break interrupts the metal-to-metal heat path, which is what keeps the interior frame face from turning into a radiator in a Texas August. NFRC-rated glass packages let you select the energy performance that fits your Austin energy audit targets.

Acoustic Performance – If your front door faces a busy Austin street, the glass choice matters more than the frame. Laminated glass is our standard recommendation for sound control on the VLX 100. The aluminum frame, paired with a proper perimeter seal, reduces air gaps that carry noise. It won’t make the house silent, but it takes the edge off traffic and neighborhood noise.

Airtightness & Weather Seal – The door ships with compression gaskets along the frame. When the multi-point lock engages, the panel cinches tight against the gasket, creating a continuous air seal. That matters in Austin where hot, humid outside air is the enemy from May through October. A door that seals properly keeps your conditioned air inside where it belongs.

Waterproofing – Installation drives water performance, and we install the VLX 100 to AAMA 2400 and 2410 standards. That means the rough opening gets flashed correctly, the sill pan is sloped to drain, and every perimeter joint gets AAMA 812 rated low-expansion foam sealant. The door itself is designed to shed water, but the installation is what keeps water out of the wall cavity over the life of the house.

Wind Resistance – Austin sees strong straight-line winds during spring storm season, and the VLX 100 is rated for wind loads that match Central Texas code requirements. The 0.098-inch wall thickness and the multi-point lock acting as a structural tie between panel and frame is what makes the door resistant to racking and flex in high wind. Homes in exposed hill country lots, in particular, benefit from the laminated glass option.

Security & Hardware – The multi-point locking hardware engages at three separate points along jamb, not just one deadbolt at handle height. It is significantly harder to force than a traditional single-point entry lock. Pair it with laminated glass and you have an entry that resists both physical prying and glass break-in. This is the hardware we recommend on ground-floor entries and doors that are not visible from the street.

Color & Glass Options

The VLX 100 comes in six finishes. Premium Black is the most requested color in Austin right now, particularly on modern new construction and renovated mid-century homes. It reads sharp against white brick or stucco. Pure White suits traditional and farmhouse exteriors and holds up well with minimal visible fading over years of direct sun. Anodized Silver is the classic commercial look, and it works well on contemporary builds with metal roofing or aluminum clad windows. Bronze is the choice for warm exteriors with stone or earth-tone siding. Champagne is a subtle warm metallic that pairs well with gold or brass hardware. Teak Wood is the option when you want the warmth of wood grain without the upkeep of a real wood door.

On the glass side: Clear glass shows off the door’s frame lines and works when you want an unobstructed view. Frosted glass brings in light but blocks visibility, good for a side entry or a door close to a neighbor. Obscure glass does the same with a textured pattern. Low-E glass cuts solar heat gain, which matters on west-facing Austin entries. Tempered glass is safety-rated, and laminated glass adds both impact resistance and sound reduction. For front doors on busy streets, we regularly recommend Low-E laminated.

Installation by Juniper Windows Austin in Austin

We have installed ViewLux doors across Austin long enough to know that the installation is half the product. A poorly installed premium door leaks, binds, and voids the manufacturer’s warranty. That reality is why we train every installer to follow the AAMA 2400 and 2410 installation standards, which ViewLux requires for warranty coverage.

Our process starts with a pre-install inspection of the rough opening. We check the framing for square, level, and plumb before the door ever comes off the truck. If the opening is out of spec, we correct it before installation, not after. Once the door is set, we shim and fasten it so that the panel hangs true. Every perimeter joint is sealed with AAMA 812 compliant low-expansion foam, which is the product specifically rated for sealing window and door openings without bowing the frame. After the door is anchored and sealed, we run a water test on the sill and lower corners, then walk the door with you to verify that the multi-point lock engages smoothly and the panel seals evenly.

Austin specific concerns: our freeze-thaw cycle is not extreme, but our summer heat causes aluminum and wall framing to expand and contract at different rates. The AAMA 812 foam accommodates that movement. Our heavy spring rain events test sill flashing immediately, and we flash every installation for drainage before the door ever sees its first storm. We also make sure the door meets local Austin Energy and City of Austin code requirements for energy performance and egress where applicable.

Frequently Asked Questions – VLX 100 Swing / Entry Door

What is the lead time for the VLX 100 Swing / Entry Door?
Lead time is typically 4 to 6 weeks from order confirmation, depending on the finish and glass combination you choose. Custom paint-matched colors or laminated glass packages can add time. We recommend ordering early in a remodel so the door arrives before your rough opening is entirely finished. Call (325) 420-1750 and we can confirm current lead times for your exact configuration.

Does the VLX 100 qualify for energy tax credits?
Doors generally do not qualify for federal energy tax credits the way windows do, but the VLX 100’s Low-E laminated glass pairing can reduce your Austin cooling load enough to show up on your energy bill. If your project includes qualifying windows or skylights, we can help you understand what documentation you need. For the door itself, expect performance, not a tax line item.

What warranty comes with the VLX 100 Swing / Entry Door?
ViewLux provides a manufacturer’s warranty on the frame, finish, and hardware when the door is installed by an authorized installation partner like Juniper Windows Austin. The warranty protects against manufacturing defects and finish failure under normal residential use. Improper installation voids that warranty, which is precisely why professional installation matters. We can walk you through the specific coverage terms when we quote your project.

Can I customize the size of the VLX 100?
Yes, within the product’s structural limits. The maximum panel width is 48 inches, and we can order custom heights to fit standard or non-standard rough openings. We measure every opening ourselves before ordering, which prevents the most common custom-size mistake: ordering a door that doesn’t fit the rough opening. Call (325) 420-1750 to set up a measurement appointment.

How do I maintain aluminum frames in Austin’s climate?
Aluminum frames need very little maintenance. Wash the frame and glass with mild soap and water twice a year, and wipe down the gaskets and locking hardware with a dry cloth. Avoid abrasive cleaners on the finish, and keep the drainage channels at the sill clear of leaves and dirt. Austin’s hard water can leave mineral spots on glass, so drying the panel after washing helps keep the glass clean over time.

Get a Quote – VLX 100 Swing / Entry Door in Austin

If the VLX 100 Swing / Entry Door fits what you have in mind for your Austin home, the next step is a free on-site measurement and project quote. We’ll spec your door exactly, confirm lead time, and walk you through finish and hardware options. Call Juniper Windows Austin at (325) 420-1750 to schedule your free estimate.

Written by the team at Juniper Windows Austin, authorized ViewLux installation partner serving Austin, TX.