VLX 100 Arched / Custom Door

VLX 100 Arched / Custom Door in Austin, TX | Juniper Windows Austin

An arched entry door changes how a home feels from the street. The VLX 100 Arched / Custom Door from ViewLux is a CNC-bent aluminum system built for exactly that effect: a clean curved architectural statement with no visible seams, no warping, and no compromise on thermal performance. Juniper Windows Austin is an authorized ViewLux installation partner serving Austin, TX and the surrounding Hill Country. We measure, order, and install these doors to AAMA standards so the curve arrives true and the seal holds through every Texas summer. Call (325) 420-1750 to talk through your project or schedule a free on-site measurement.

Call (325) 420-1750

Product Overview – VLX 100 Arched / Custom Door

The VLX 100 Arched / Custom Door is built for homeowners who want something beyond a standard rectangle. Architectural curves are hard to do well in metal. Most manufacturers bend hollow profiles, which creates ripples, stress points, and uneven sightlines. ViewLux takes a different approach: the aluminum is CNC-bent to your exact radius and rise, which means the arch holds its shape at the corners, the reveals stay consistent, and the door closes into its frame with a uniform gap all the way around.

We see this door specified most often in two Austin contexts. First, modern and Mediterranean-influenced builds in neighborhoods like Tarrytown, Barton Hills, and Pemberton Heights, where the arched front entry is part of the architectural language. Second, custom homes in Westlake and Lakeway where the entry is a signature element and homeowners want a door that reads as intentional, not an afterthought. The VLX 100 fits both because it is understated at rest but dramatic in form. The profile is substantial at 2.56 inches wide, with a wall thickness of 0.098 inches, so the door has real physical presence without feeling industrial.

The maximum span is custom fabricated to order, which means we are not limited to any catalog of standard arch sizes. If your opening is ten feet wide with a gothic radius, we build to it. If it is a modest three-foot arched opening in a 1950s bungalow in Brentwood, we build to that too. The point of this series is fit: the door is made for your opening, not reverse-engineered to land near it.

For Austin buyers, the material choice matters. Aluminum does not swell in humidity the way wood does, does not rust the way steel will in a shaded north-facing entry, and does not require the seasonal maintenance that solid timber doors demand. The VLX 100 performs the way high-end aluminum window systems perform: stable, predictable, and rated for the conditions we actually live with in Central Texas.

Technical Specifications

Here is what the VLX 100 Arched / Custom Door is made of, in plain terms.

• Wall thickness: 0.098-inch aluminum extrusion, CNC-bent to the specified arch radius.
• Profile width: 2.56 inches, a visibly substantial frame that reads as architectural rather than utilitarian.
• Maximum span: Custom fabricated to order. No preset size table. We build to your rough opening and can supply for openings most manufacturers will not attempt.
• Glass options: Clear, Frosted, Obscure, Low-E, Tempered, Laminated. Combinations and double-glazed assemblies are available.
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, and Teak Wood. All finishes are factory-applied or anodized, not site-painted.
• Thermal performance: Thermal break technology within the aluminum profile, with glazing options suitable for NFRC-rated performance.
• Installation standard: Installed by Juniper Windows Austin to AAMA 2400/2410, with AAMA 812 low-expansion foam sealant on all perimeter joints.
• Impact resistance: Laminated glass option available for impact-rated assemblies where Austin wind-load requirements call for it.

Performance Features

How does the VLX 100 perform in Austin’s climate?

In short: it is engineered for it. The door carries a thermal break inside the aluminum profile, which interrupts the conductive path between the outer and inner faces of the frame. On a 104-degree August afternoon in Austin, a non-thermally-broken aluminum door will radiate heat to the interior face. This one will not. Pair it with Low-E glass and the assembly performs at the level of a high-efficiency window wall, not an old-school metal door.

Thermal Efficiency – The VLX 100 uses a built-in thermal break through the full profile depth. That means the aluminum on the outside stays hot and the aluminum on the inside stays close to your indoor temperature. Combined with NFRC-rated glazing packs (clear, Low-E, or obscure), the door manages summer heat load without sacrificing the slim sightlines that make arched aluminum attractive. For Austin’s cooling-dominated climate, the efficiency story is mostly about keeping exterior heat outside.

Acoustic Performance – Arched entry doors are often the largest single opening on the front elevation, which makes them the weak point for street noise. The VLX 100 frame with laminated glass meaningfully reduces exterior sound transmission. We have placed these on homes along major Austin thoroughfares like Burnet Road and South Lamar, where traffic noise is a real daily factor, and the difference after installation is noticeable. The combination of a rigid aluminum frame, quality gaskets, and laminated glass is more effective than anyone expects from a door.

Airtightness & Weather Seal – Air leakage is where most arched doors in Austin fail. If the frame has any flex, the gaskets lose contact along the curve and you get drafts, dust, and pollen migration during cedar fever season. The VLX 100 avoids this by engineering the bend before assembly, so gasket seating surfaces remain consistent along the full arch. The factory weather-stripping is part of the extrusion design, not an add-on, which means the seal runs continuously around the perimeter.

Waterproofing – Austin’s rain events are getting heavier and shorter. A door that cannot handle a three-inch downpour will show it at the threshold corners within a season. The VLX 100 frame includes an integrated sill track and weep system designed to move water out rather than hold it. Combined with AAMA 812 low-expansion foam sealant installed on every perimeter joint by Juniper Windows Austin, the assembly resists water intrusion at the exact points where arched entries typically leak: the spring line and the sill corners. We also perform a final water test on every installation before calling the job done.

Wind Resistance – Austin sits in a wind zone where unprotected glass on a large entry opening is a liability. The 0.098-inch wall thickness in the VLX 100 profile gives the frame the rigidity needed to hold a large laminated lite under sustained wind pressure without deflection. For larger arched spans, particularly two-story entries, we recommend laminated glass for impact resistance and added structural contribution. The door is wind-load rated for the local climate requirements that govern residential entry systems.

Security & Hardware – An arched front door is the primary point of entry for your home, so hardware selection matters. The VLX 100 accepts multipoint locking hardware, which engages the frame at multiple locations along the vertical jambs rather than at a single deadbolt point. Combined with the inherent rigidity of the 2.56-inch aluminum profile, the door resists prying far better than a wood slab of comparable size. Tempered or laminated glass options add another layer of intrusion resistance if security is a priority.

Color & Glass Options

What finishes and glass are available for the VLX 100?

Six finishes and six glass types, and the combinations can be tailored to your home’s elevation.

Premium Black is the most requested finish we install in Austin today, particularly on modern and contemporary builds in Mueller and East Austin where a dark, minimal frame reads cleanly against white stucco or limestone. Pure White suits traditional and transitional homes, matching painted trim around arched entries in neighborhoods like Hyde Park and Allandale. Anodized Silver offers a true metallic finish that resists fading better than any paint can, which makes it popular for mid-century modern homes in Northwest Hills. Bronze lands between, a warmer dark tone that complements the Hill Country stone and cedar exteriors common in Westlake and Lake Travis. Champagne is the lightest warm metallic and pairs beautifully with cream stucco and warm mortar tones. Teak Wood is a textured, wood-grain finish for homeowners who want the look of timber without the maintenance; it is especially convincing on French-curved and eyebrow arch profiles.

For glass, Clear maximizes natural light at the entry. Frosted and Obscure provide privacy while still passing light, ideal when the entry opens directly onto a living space. Low-E is the efficiency option, reflecting infrared heat in Austin summers. Tempered is safety-rated and required by code in many full-lite door applications. Laminated adds impact resistance and sound reduction and is what we recommend for large arched spans, high-wind exposure, and homes where security is a concern. Glazing packages can combine Low-E with laminated or tempered, depending on your priorities.

Installation by Juniper Windows Austin in Austin

Here is the uncomfortable truth about arched doors: the manufacturing is only half the outcome. An expensive, beautifully fabricated VLX 100 will underperform if it is installed an eighth of an inch out of square or sealed with the wrong materials. Manufacturer warranties cover product defects, not installation errors. If the installer sets the frame out of plumb, you will see it in the arch line. If they skip the sill flashing, you will see water. Neither is covered, and neither is cheap to fix.

That is why Juniper Windows Austin treats installation as part of the product. We begin with a pre-install inspection of the rough opening, checking the structural lintel that carries the load above the arch, verifying the rough opening dimensions against the shop drawings, and confirming the sill is ready for a full assembly. Every VLX 100 we install in Austin gets set level, plumb, and square with no exceptions. The arch is checked at multiple points along the radius, not just at the crown.

We seal every perimeter joint with AAMA 812 low-expansion foam sealant, which stays flexible through the thermal expansion cycles that Austin’s temperature swings put on aluminum frames. The installation follows AAMA 2400/2410 standards for residential fenestration, which dictates how fasteners, shims, flashing, and seals must be handled. After the door is set and glazed, we run a water test around the sill and lower jambs, then walk the interior and exterior with you to confirm the operation, the seals, and the finish.

Austin-specific factors we account for on every install: the clay-heavy soils in parts of the city that cause slab movement and opening settling over time, the afternoon western sun exposure that heats dark-finished frames past 160 degrees in summer, and the wind-driven rain patterns that hit north-facing entries hardest during spring storm season. The VLX 100 handled together with a proper installation is a system we stand behind. Call (325) 420-1750 to schedule a free on-site measurement and see the quality of our process for yourself.

Frequently Asked Questions – VLX 100 Arched / Custom Door

Get a Quote – VLX 100 Arched / Custom Door in Austin

An arched entry is a signature feature. It deserves a door built for the specific opening, installed by a team that treats every curve as a point of inspection. Juniper Windows Austin supplies and installs the ViewLux VLX 100 Arched / Custom Door throughout Austin, TX. Start with a free on-site measurement and a written line-item quote, including finish, glass, hardware, and installation. Call (325) 420-1750 today.

Written by the team at Juniper Windows Austin, an authorized ViewLux installation partner serving Austin, TX.