New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Windows & Doors in Cedar Park, TX | Juniper Windows Austin
We’re an independent Cedar Park team that services CGI windows and doors across the city, and the short answer is this: most CGI failures we see here are thermal-cycling and seal problems, not structural defects. Cedar Park’s heat loads hit west-facing elevations hard, and the limestone-rich soil underneath shifts enough to stress frames over time. If your CGI windows are fogging or binding, call us at (325) 420-1750 and we’ll tell you whether it’s a repair or a replacement, with a written price before anything starts.
We carry genuine CGI parts where they’re available, and we know which aftermarket components actually fit these profiles when CGI’s own supply chain runs slow. If you need CGI sales & service from a crew that sees these units in real Cedar Park homes every week, we’re your shop.
Why Cedar Park Residents Choose Us for CGI Service
Sean Mackey, our owner, learned the window trade at Los Angeles Trade-Technical College and has spent years focused on how windows actually perform in Texas heat, not just how they look in a brochure. He’s been straight with Cedar Park homeowners about U-factors, lead times, and what a realistic Window Installation in Cedar Park looks like since before most of the subdivisions off Lakeline Boulevard were even finished. His line is simple: “If the numbers don’t back it up, I’m not going to sell it to you.”
We’re the windows-and-doors specialist inside the Relay Home Co. family, founded in 2001. Every project gets a written price before a single screw turns, backed by the 365-Day Done Right Promise: if the work isn’t right, we make it right, parts and labor, in writing, for a full year. Our techs are background-checked and uniformed, and a real person answers our phone 24/7. That matters when your CGI door stop is sticking on a 100-degree afternoon and you need a straight answer.
We’re not a CGI authorized dealer or manufacturer affiliate. That’s intentional. It means we tell you when a part is worth replacing and when the whole unit has served its time, without a brand quota hanging over the recommendation. For Cedar Park service area coverage, we’re the crew that tracks how CGI frames, balances, and glazing actually respond to our local soil and hail seasons.
Common CGI Windows & Doors Problems We Solve in Cedar Park
These are the failures we see most often on CGI units in this city. Most are repairable; a few are not worth throwing money at. We’ll tell you which is which.
- Fogged or hazy glass between the panes. Insulating glass units lose their seal after thousands of thermal cycles. In Cedar Park, west-facing CGI windows in Buttercup Creek fog up in clusters, because the afternoon sun on those elevations drives faster seal degradation. The glass unit is the fix, not the entire window.
- Warped or bowed vinyl sashes that bind or stick. CGI vinyl windows from the early 2000s were solid units, but 20-plus years of Cedar Park heat expansion and overnight cooling leaves sashes slightly bowed on the hottest walls. They still open, but they fight you the whole way.
- Double-hung windows that fall or won’t hold position. The balance system inside CGI double-hungs corrodes or loses spring tension over time, especially in areas near Brushy Creek where humidity runs higher. A sudden drop when you let go is a balance failure, and it’s repairable without touching the glass.
- Hail damage to aluminum cladding on CGI doors. Cedar Park spring hailstorms don’t always shatter glass. More often, they dent the aluminum cladding on CGI door frames and leave the glass looking fine. We inspect the whole exterior, not just what’s obvious from the driveway.
- Stiff or seized CGI casement window cranks in the summer. The crank mechanism expands and binds when the operator arm heats up. Often it’s a dirty or dry gear track; sometimes the operator itself needs replacement. Quick fix either way.
CGI Service in Cedar Park: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic CGI service page: Cedar Park’s Buttercup Creek neighborhood has a documented pattern we’ve now seen on dozens of homes. Early-2000s CGI windows on west-facing walls fail at a much higher rate than east-facing units on the same streets. Fogged panes, warped sashes, failed balances, all of it clusters on the west elevation. It’s a microclimate effect: the afternoon sun pounds those walls for the hottest hours of the day, through the hottest months of the year, year after year. Meanwhile, the limestone-rich soil under the foundation shifts subtly with every wet-dry cycle, and that movement transmits through the frame corners. East-facing windows on the same house, same age, same product line, often look nearly new. If you own a home in Buttercup Creek or an adjacent neighborhood, check your west-facing CGI units first. If multiple windows on that wall show the same symptoms, that tells us the whole wall is aging as a system, and we’ll recommend replacing them together rather than patching one unit this year and the next one six months later.
That insight shapes how we bid CGI work in Cedar Park. It’s why we don’t just swap one window and call it done when the evidence says the elevation is failing as a group. It’s also why we spec low-E glass and heavier weatherstripping on replacement inserts for west-facing walls. The old units lose heat gain through the glass and air infiltration through worn seals. The new ones should be built for the wall they’re going into, not just the opening.
CGI Models & Products We Service in Cedar Park
We service the full line of CGI windows and doors that turn up in Cedar Park homes: the Estate Collection, Sentinel Series, Classic Series, and the 9500 Series. Estate units are the heavy impact-rated builds, Sentinel brings the reinforced frame profiles, Classic covers the workhorse double-hungs and casements from the 2000s, and 9500 is the modern aluminum line. Each has its own balance style, weatherstripping profile, and glazing bead, and we stock the common ones locally for faster turnarounds.
Our rule on parts is straightforward. When we can get genuine CGI parts, like balances, glazing beads, and weatherstripping, that’s what goes in. When CGI has discontinued a profile or backordered a seal for months, we source quality aftermarket parts that match the original dimensions and materials. We don’t guess. We measure, test-fit, and photograph the work. If a failure is isolated to one replaceable part, we repair. If multiple components on an aging unit are worn, we recommend replacement and show you the math on why repair no longer makes sense.
CGI Service Pricing in Cedar Park
Here’s what CGI service typically costs in Cedar Park, so you’re not calling blind:
- Insulating glass unit replacement: $180 to $320 per pane, depending on glass type and size
- Balance system replacement (single double-hung): $95 to $160 per window
- Casement crank operator replacement: $85 to $140 per window
- Hail-damage cladding repair: $150 to $400 per door, depending on panel count and dent severity
- Full insert window replacement (west-facing, low-E): $600 to $1,200 per window installed
What drives the price is the model line, the part availability, and whether the work is on a Class II or III elevation. A Sentinel Series balance costs more than a Classic Series balance. A custom-sized IG unit costs more than a stock size. Your free estimate includes a full inspection of the unfixable damage we call out, so you know exactly what you’re paying for. Call (325) 420-1750 and we’ll give you a written price before any work starts. Our crew recently replaced two CGI Classic Series double-hungs on a west-facing wall in Buttercup Creek. The sashes were warped enough to bind, and one pane had lost its seal and was fogged. We installed new insert windows with low-E glass and a better weatherstripping profile, and the homeowner noticed the room stayed cooler within days.
Serving Cedar Park, TX - Our Local Coverage Area
We’re based in the Cedar Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in Cedar Park
West-facing walls in Cedar Park take the full force of afternoon heat, which expands and contracts the seal around the insulating glass unit faster than on shaded elevations. After enough thermal cycles, the seal breaches and humidity gets between the panes. It’s a localized pattern, and it’s why we inspect the whole elevation before recommending a repair strategy. Call (325) 420-1750 if you’re seeing fog on multiple west-facing windows.
Yes, if the damage is limited to the aluminum cladding or exterior frame panels. We can often repair or replace the cladding without touching the door slab, hinges, or glass. If the hail dented the door panel itself or cracked the frame corners, replacement may be the more honest recommendation. We’ll show you the damage up close, with photos, before you decide.
Many are, though some Classic Series balance profiles from that era have been discontinued. We source genuine CGI balances when they’re still in the supply chain, and for the discontinued profiles we use aftermarket balances that match the original spring tension and shoe profile. The repair restores the same operation, and we test the window through ten full cycles before we leave.
If the sash moves smoothly and the frame is square, replacing the insulating glass unit is the cost-effective fix. It runs $180 to $320 per pane in Cedar Park, which is far less than a full window replacement. We won’t sell you a new window when the old one just needs new glass. If the frame is also warped or the balance is failing, we’ll tell you that too.
The operator arm expands in the heat, and if the gear track is dry or dirty, that expansion turns into friction. In some cases the fix is as simple as cleaning and lubricating the track; in others the operator gear itself has worn and needs replacement. Either way, it’s a $85 to $140 repair, not a window replacement. Call (325) 420-1750 for an exact quote, estimates are free.
Service Areas Near Cedar Park
We service CGI windows and doors across the north Austin corridor. If you’re in Brushy Creek or Wells Branch, we’re usually there within a couple of days. We also run crews into Lakeway for impact-rated door work, and cover CGI service in Austin proper for homeowners there. For projects farther south, we can point you to our CGI service in Lockhart coverage. If you’re in Cedar Park or the immediate surrounding area, call us first.
Book Your CGI Service in Cedar Park Today
If your CGI windows are fogging, binding, or taking hail damage, call (325) 420-1750 today. We’ll set up a free estimate, walk the whole elevation with you, and hand you a written price before anything starts. Same-day service is available for balance failures and casement crank repairs when the schedule allows.
Written by Sean Mackey, Owner at Juniper Windows Austin, serving Cedar Park homeowners with independent CGI service and straight answers since 2001.
Six Reasons Homeowners Choose Juniper Windows Austin
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.