New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Door Replacement in Austin: What to Know First
ECO Window Systems door replacement in Austin typically runs $1,850 to $6,400 per door, depending on the line, the frame condition, and whether we’re swapping a slab or the full pre-hung unit. Most ECO door replacements take one day, we pull the old unit in the morning and lock the new one in place before dinner. That’s the honest range, not a teaser designed to get you to call so we can “sharpen the pencil.” As an independent ECO Window Systems service provider, we work on ECO products every month, and Sean Mackey and our crew aren’t shy about telling you when a door can be saved and when it’s past saving. If you own an ECO door, this page is for you. Call (325) 420-1750 when you’re ready for a written, locked-in price.
How ECO Window Systems Products Fail – and How We Fix Them
ECO Window Systems makes a solid product for the Texas market, but no door survives Austin’s sun, humidity, and seasonal soil movement forever. Here’s what we actually see in the field, and what we do about it.
- ECO 4500 Series sliding glass doors – track wear and roller collapse. The single-roller carriers on the 4500 series are the weak link. After five or six Austin summers, the nylon wheels flatten on the bottom track, the door starts dragging, and the bottom rail chews through the track. We see this most in homes east of I-35 where doors face west and take the full afternoon sun. We replace the roller assembly and, if the track is grooved, install a stainless steel cap so it doesn’t happen again in two years.
- ECO Euroline tilt-turn doors – seal compression loss. The multi-point locking system on the Euroline is excellent until the rubber compression seals harden. Austin’s low humidity in August cooks the EPDM, it loses its spring, and the door starts breathing air around the jamb. Homeowners feel a draft and assume they need a new door. Most of the time we replace the gaskets, realign the hardware, and the door tightens back up. Sean has done this exact fix in Hyde Park bungalows where the door was original to a 2008 retrofit.
- ECO thermally broken steel door systems – hinge sag on the outswing units. The thermally broken steel doors are heavy. When they’re hung outswing on a south-facing exposure, the top hinge loads unevenly and the door drops a quarter inch, lifts at the latch, and won’t seal. We reset the hinges with longer screws into the framing, not just the jamb, and re-shim. It’s a two-hour fix that most companies won’t bother with because they want to sell you a new $4,000 door.
- ECO storm door lines – pneumatic closer failure in Austin heat. The pneumatic closers on ECO storm doors are fine in mild climates, but a Texas afternoon at 103 degrees cooks the internal seals and the door starts slamming. We swap in a higher-temp-rated closer from the aftermarket – costs about $80, takes twenty minutes, and the door behaves like new. This is one of those fixes we’d rather do than sell you a whole storm door.
- ECO French door units – center mullion warping. On the eco-Clad wood-aluminum French doors, we’ve seen the center mullion bow slightly when the door is on an exterior wall with no porch cover. Austin’s afternoon sun hits the dark aluminum cladding, the thermal expansion is uneven, and the active leaf starts catching on the mullion top. We correct it by adjusting the mullion anchors rather than planing the leaf down, which keeps the door’s weather rating intact.
Our ECO Window Systems Door Replacement Process
Every ECO door job follows the same path, whether we’re swapping a 4500 slider in Barton Hills or replacing a Euroline entry door in Mueller.
- 1
Call and booking. A live person answers at (325) 420-1750, 24/7. We schedule the visit and you get a live arrival time through the Relay Standard, same as a rideshare app.
- 2
On-site diagnostic. We pull the interior trim if needed, check the rough opening, the existing frame integrity, and the door’s actual condition before recommending anything. No quote without eyes on the door.
- 3
Parts decision. We tell you straight whether OEM ECO parts make sense or whether a proven aftermarket part does the same job for less. If it’s a warranty-covered item, we say so and walk you through how to file it.
- 4
Written price. You get a line-item price before any work starts. Not a range, not a “we’ll see what we find.” A number, in writing, that doesn’t change.
- 5
Installation and testing. We replace the door, shim and level it properly, and run it through a full cycle test – open, close, latch, seal, lock. Photos before and after, so you can see what we did.
- 6
Guarantee in hand. Every job is covered by the 365-Day Done Right Promise: parts and labor, in writing, for a full year. If something isn’t right, we make it right.
What ECO Window Systems Door Replacement Costs in Austin
| Scenario | Typical Austin Price Range |
|---|---|
| Slab replacement only (same frame, new ECO or aftermarket slab) | $1,850 – $3,200 |
| Full pre-hung door replacement (tear out old frame, install new) | $2,400 – $4,800 |
| ECO 4500 sliding glass door replacement (patio, 6-8 foot opening) | $2,800 – $5,400 |
| French door or Euroline tilt-turn replacement (entry, insulated glass) | $3,200 – $6,400 |
| Hardware rebuild: hinges, rollers, closers, multi-point locks | $220 – $850 |
What moves the price: size of the rough opening, whether the old frame can stay or needs full replacement, glass package if you want impact-rated or Low-E upgrade, and trim work after install. We don’t pad the number. Every quote is line-item, and the price you sign is the price you pay. Call (325) 420-1750 for an exact figure, estimates are free.
Why Austin Homeowners Call Juniper Windows Austin for ECO Window Systems Work
We’re Austin’s ECO Window Systems door specialists because we took the time to actually learn the product lines, not just sell them. Sean learned the trade at Los Angeles Trade-Technical College and has spent years focused on how doors and windows actually perform under real weather, not just how they look in a brochure. His line on a job site is simple: “If the numbers don’t back it up, I’m not going to sell it to you.” That means when an ECO door can be fixed for $300, we tell you, even though a $4,000 replacement would be nicer for our revenue. Beyond ECO, we work on PGT, CGI, CWS, and ES Windows, so if you need an impact-rated upgrade or a different line for another opening, we can do that too without sending you to a different company. Every job gets the Relay Visibility Guarantee: live arrival time, before-and-after photos, a written price before anything starts, and a digital invoice you can pay from your phone.
FAQs
You can often replace just the slab if the existing ECO frame is square, rot-free, and the hinges are still tight. We’ll tell you after we inspect it. If the frame is warped or the rough opening has shifted (common in Austin’s clay-heavy soil), a full pre-hung replacement is the honest fix. Call (325) 420-1750 and we’ll come look.
Replacing a door slab or hardware on an ECO Window Systems product does not void the warranty on the remaining original components as long as the work is done correctly and doesn’t damage the frame or surrounding structure. We’re an independent ECO service provider, not factory-authorized, so we can’t file warranty claims for you, but we’ll tell you straight if a failure is a warranty issue and make every reasonable fix without touching covered parts. Call (325) 420-1750 for guidance.
Most single-door ECO replacements are done in one day. Sliding patio doors can run a little longer, sometimes a day and a half if there’s stucco or masonry trim to match. We schedule the work and show up when we say, with a live arrival time you can track. Call (325) 420-1750 for a realistic timeline on your specific door.
Both. We keep common ECO rollers, closers, seals, and hinge hardware on our trucks because Austin heat failures are predictable. For more unusual parts, like a Euroline multi-point lock body, we order from our supplier network and have them in hand within a week. We’ll set expectations on parts timing before any work begins. Call (325) 420-1750.
Usually yes, if the door is under 12 years old and the frame is solid. A roller swap or seal replacement runs $220 to $850, versus $1,850 and up for a new door. But if the door is compromised structurally, or the glass is ballooning its argon fill, we’ll tell you straight that repair is throwing good money after bad. Call (325) 420-1750 and we’ll give you the honest assessment, free.
Yes. We can source the same ECO line and glass package so the new door matches the original, whether that’s a 4500 slider or a Euroline entry unit. Color, handle set, and sightlines can all be matched. Bring us a photo of the existing door when you call (325) 420-1750 and we’ll identify the line before we come out.
That’s usually a roller or hinge problem, not a door failure. For sliders, it’s flattened rollers or a grooved bottom track. For swing doors, it’s hinge sag or seal drag. We diagnose it on-site and give you a written quote for the fix before doing anything. Call (325) 420-1750 to get on the schedule.
If your ECO Window Systems door is failing, dragging, drafty, or just shows its years, call (325) 420-1750. We’ll schedule a free estimate, come out when we say, give you a written price before any work starts, and back the finished job with the 365-Day Done Right Promise. No voicemail maze, no four-hour windows. You’ll know exactly who’s at your door and exactly what it costs.
Written by Sean Mackey, Owner, Juniper Windows Austin at Juniper Windows Austin, serving Austin and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Austin
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.