New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Door Replacement Across Brushy Creek
Door replacement in Brushy Creek typically runs $900 – $4,800 depending on the opening, the material, and whether the door carries an impact rating. Entry doors with impact-rated glass cost more than a basic slab swap, and a sliding patio door replacement lands higher still. If you’re east of Parmer Lane or up near the lake, the wind exposure changes what your door has to meet, and we factor that in before we ever hand you a price. Call (325) 420-1750 and you’ll get a real person who can schedule a measurement visit to your Brushy Creek home.
Our crews know Brushy Creek. We’re in and out of neighborhoods like Cat Hollow, Brushy Creek North, and Sendero Springs every week, pulling fogged patio doors, squaring up sagging entry doors, and replacing hollow-core interior doors that have warped from years of hill-country humidity. Dispatch runs from our Austin office, but the techs who show up at your door are local, background-checked, and uniformed, and they arrive with a live arrival time you can track from your phone.
Why Juniper Windows Austin Is Brushy Creek’s Preferred Door Replacement Company
We’re not a general contractor who happens to hang a door now and then. Juniper Windows Austin is a Door Replacement specialist, part of the Relay Home Co. family since 2001, and every project we take in Brushy Creek is priced in writing before any work starts. No estimate that “adjusts” when the truck pulls up. The number we quote is the number you pay, and it’s covered by our 365-Day Done Right Promise: 365 days, parts and labor, in writing.
Brushy Creek homeowners tell us the same thing again and again: they called us because someone else gave them a vague range, then changed it at the door. Led by Sean Mackey, our team runs on The Relay Standard. That means you book in a tap, get a live arrival time, see before-and-after photos of the work, and receive a digital invoice you can pay from a link. No voicemail maze, no four-hour window. A live person answers the phone 24/7, including weekends when a storm has left a door twisted in its frame.
We also carry the product lines that actually pass inspection in Williamson County. Impact-rated doors from PGT, Therma-Tru, and ViewLux are stock items for us, not special orders that add three weeks to your timeline. For Brushy Creek homes facing hail season and wind-driven rain, that matters.
Door Frame Repair in Brushy Creek
Door Frame Repair in Brushy Creek usually means one of three things: a jamb that has rotted at the bottom from wind-driven rain wicking under the threshold, a frame that has pulled away from the brick or stone veneer after years of thermal expansion, or a door that no longer latches square because the slab foundation has shifted. Most frame repairs on a standard entry door run $250 – $700, depending on how much of the jamb has to be removed and whether we need to reset the threshold with proper sill pan flashing.
On older Brushy Creek homes, especially those built in the 1990s, the original door frames were set directly on the slab with nothing but caulk. That worked until the first real thunderstorm. We see it constantly near Brushy Creek Lake and along O’Connor Drive: water gets under the threshold, the jamb wicks it up, and within two seasons the bottom six inches of the frame is soft enough to push a screwdriver through.
Jamb and Threshold Rebuild
When we rebuild a jamb in Brushy Creek, we don’t piece it back together with epoxy and a prayer. We cut out the rotted section, set a pressure-treated or composite replacement, flash the opening with a sill pan that directs water back out, and seal everything with backer rod and polyurethane caulk. The result is a frame that holds a heavy impact door without sagging.
Resetting a Door After Slab Movement
Central Texas clay soil moves. It swells after rain and shrinks in drought, and Brushy Creek is no exception. A door that sticks at the top in August and swings open on its own in February is usually a frame alignment problem, not a bad door. We can often reset the existing frame and install adjustable hinges rather than replacing the whole unit.
Interior Door Replacement in Brushy Creek
Interior Door Replacement in Brushy Creek often surprises people with how much it changes the feel of a home. Hollow-core builder doors from the late 80s and 90s take a beating in humid heat, and after twenty years many of them rattle, bind, or have hairline cracks along the stiles. A pre-hung solid-core replacement typically runs $180 – $400 per door, with labor, hardware, and trim included.
Most Brushy Creek homes have six-panel or flat-slab hollow interior doors that were installed quickly and cheaply when the neighborhoods were developed. In master bedrooms and bathrooms especially, homeowners are switching to solid-core doors for sound deadening and to keep the HVAC from doing more work than it should.
Warped and Sticking Interior Doors
Humidity is hard on interior doors here. A door that swelled shut in July and left a gap in January has absorbed moisture into the core. We’ll often replace it with a solid MDF or pine door that’s sealed on all six sides, including the top and bottom edges, which is what keeps future moisture out.
Upgrading to Solid-Core for Noise and Privacy
For bedrooms that face a busy hallway or a home office, a solid-core interior door does more than look better. It cuts sound transmission enough that you’ll notice it the first week. The cost sits at the upper end of the range, because you’re paying for a heavier door and often new casing, but it’s one of the best value upgrades in an older Brushy Creek floor plan.
Trusted Brands We Service in Brushy Creek
We maintain stock and direct ordering access for the door brands that meet Williamson County’s wind-borne debris requirements. That includes PGT impact-rated hinged doors, Therma-Tru entry and patio doors with laminated glass, and ViewLux sliding doors that carry design pressure ratings high enough for Exposure B and C homes. CGI products round out our impact-rated line for Brushy Creek customers who want the strongest large-missile certification available. Because these are brands we install every week, not special-order outliers, replacement hardware, hinges, and weatherstripping for them are available quickly – often same week in Brushy Creek rather than waiting on a distributor across the state.
Common Door Replacement Problems We See in Brushy Creek Homes
- Fogged patio door glass near the lake. Homes in the northern sections around Brushy Creek Lake deal with tree canopy shade and high humidity that cause the glass to cycle between hot and cool constantly. That thermal cycling is hard on double-pane seals, and we see fogged sliders in that area more than anywhere else we work in Williamson County.
- Impact-rated compliance failures. A lot of door replacements done in the 2000s used standard insulated glass with no large-missile rating. When a homeowner files for an insurance wind-mitigation credit today, the paperwork gets rejected because the door label doesn’t show the design pressure rating the county requires.
- Sill rot from missed flashing. We keep coming behind crews who set a new door directly on the slab with no sill pan. A single severe thunderstorm with wind-driven rain is enough to start wicking, and by the second spring the jamb is spongy and the threshold flexes underfoot.
- Builder-grade hinges failing under impact-door weight. A real impact-rated door is heavy. Hanging one on the original 1990s hinges and a jamb that was never reinforced for a 200-pound door creates sagging, air leaks, and a strike plate that won’t catch. We fix this with long screws that anchor into the framing and a reinforced jamb.
Pricing for Door Replacement in Brushy Creek, TX
An interior slab door swap runs $180 – $400 installed. A new hinged entry door, pre-hung and trimmed, lands between $900 and $2,600 depending on material, glass, and whether it’s impact-rated. Sliding patio doors start around $1,800 and go to $4,800 for a large impact-rated unit with laminated glass. Door frame repair is typically $250 – $700. If a door replacement requires a permit inspection for wind-borne debris compliance, we handle that paperwork and the inspection coordination as part of the job.
Every quote is a written, fixed price. You’ll see the line items, the door model, the design pressure rating if applicable, and the flashing scope before you sign anything. To get exact numbers for your Brushy Creek home, call (325) 420-1750 for a free estimate. There’s no obligation and no one is going to pressure you at the door.
We Also Serve Cities Near Brushy Creek
We work throughout Williamson and Travis counties. Our Door Replacement in Brushy Creek neighbors call us from Austin, Cedar Park, Lockhart, and Lakeway, and our crews are scheduled across all five areas every week. Same written pricing, same 365-Day Done Right Promise, same live phone answer.
Serving Brushy Creek, TX - Our Local Coverage Area
We’re based in the Brushy Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Brushy Creek
Exterior doors with glass in Exposure B or C areas of Brushy Creek must be wind-borne debris protected, meaning the door label needs to show a design pressure rating that satisfies the 2018 IRC with Texas amendments as adopted by Williamson County. In plain terms, an impact-rated door with laminated glass or a shutter system is required, and the county inspector will verify the stamp on the door label. Call (325) 420-1750 if you’re not sure whether your home falls in Exposure B or C – we’ll check the county’s wind zone map for you at no charge.
To claim the full wind-mitigation credit on your property insurance, all exterior openings – doors and windows – typically need documented impact protection. Replacing only the front door rarely qualifies on its own. But we can document your door’s design pressure rating correctly, which matters if you’re planning to do the rest of the openings over time. Have your insurer’s wind-mitigation form ready and we’ll make sure the door portion matches what the county approved.
Homes near Brushy Creek Lake sit under heavier tree canopy and next to standing water, which raises local humidity. Glass seals fail faster when the panel cycles between hot afternoon sun and cool shaded evenings – that constant expansion and contraction is what breaks the seal. We see fogged sliders in the northern lake area of Brushy Creek at roughly double the rate we see them in the southern neighborhoods along FM 1431.
The inspector verifies the door label’s design pressure rating, checks that impact-rated glazing or a shutter system is present where required, and looks at the flashing details around the opening. That includes sill pan flashing at the bottom and proper sealing at the jambs and head. If the label is missing or the flashing was skipped, the inspection fails. Call (325) 420-1750 before you hire anyone, and ask whether their quote includes the permit and inspection pass – ours always does.
Yes. Any exterior door replacement in Brushy Creek that changes the opening type – slider to hinged, for example – requires a permit and inspection through Williamson County. We handle the permit paperwork, pull it before work starts, and coordinate the final inspection. The approved permit and passed inspection are part of your project file, which is also what you’ll want for any insurance wind-mitigation claim.
Ready to get a real number? Call (325) 420-1750 and we’ll schedule a free measurement visit at your Brushy Creek home. Written price first. Always.
Written by Sean Mackey, Owner at Juniper Windows Austin, serving Brushy Creek door replacement needs with a written price and a 365-Day Done Right Promise.
Six Reasons Homeowners Choose Juniper Windows Austin
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.