New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Door Replacement Across Manor
Door replacement in Manor, TX typically runs $480 – $2,900 depending on whether we’re swapping a hollow-core interior slab or setting a new exterior pre-hung unit with a composite jamb. Most Manor jobs are done in one day. The real variable here isn’t labor, it’s what we find when we pull the old door: clay-shift racking, builder-grade hinge failures, or a frame that’s drifted out of square since the last drought. Our crews arrive with slab-jack checks on the schedule, not as an upsell. Call (325) 420-1750 for a written quote before anything gets ordered.
We’ve worked Manor long enough to know the difference between a door that’s failed and a house that’s moved. That distinction shapes everything about how we quote and install. A door hung plumb in January may bind at the strike plate by August on Manor’s clay. We plan for that.
Why Juniper Windows Austin Is Manor’s Preferred Door Replacement Company
Manor homeowners keep calling us for one reason: we write the price down before a single screw turns. No estimate that morphs into a surprise invoice at the door. Juniper Windows Austin is part of the Relay Home Co. family, founded in 2001, and every project carries the 365-Day Done Right Promise: if it’s not right, we make it right, for a full year after installation, parts and labor, in writing. That matters on a door that has to seal against Central Texas heat and hold its reveal through foundation movement.
Our techs are background-checked and uniformed. When we say a live arrival time, you can track it. Before-and-after photos of every job. A digital invoice you can pay from a link. The Relay Standard is built for people who book everything on their phone and have zero patience for four-hour windows or no-shows.
When you call Juniper Windows Austin, a real person answers. Not a voicemail maze. Not a callback queue. 24/7. Ask us about door replacement in Manor, and you’ll get specifics, not a script. We coordinate scheduling from our Austin office, but the crews who serve Manor know the subdivisions, the soil, and the older grid near downtown because they work it every week.
Interior Door Replacement in Manor
Door Replacement for interior work in Manor usually means pulling a builder-grade hollow-core slab that’s warped in its first summer and dropping in a solid-core unit that won’t twist. Hollow-core doors on east-side Manor production homes are notorious for top-corner gaps that leak conditioned air into the hallway. On a 2015-era home off 973, we see it constantly: the door looked fine at closing, then the first drought cycle pulled moisture from the clay and the slab cupped.
Solid-core interior doors in Manor run roughly $380 – $820 installed, including hardware and trim touch-up. Pre-hung solid-core units with new jambs run higher, $600 – $1,100, and that’s the right call when the rough opening has drifted out of square. Hollow-core replacements are cheaper but we rarely recommend them for a home you plan to keep.
Slab Swaps vs. Pre-Hung Replacements
A slab swap keeps the existing jamb and replaces only the door itself. It’s faster and cheaper. But if Manor’s clay has racked the frame, a new slab inherits the problem. Pre-hung replacement resets the jamb to plumb and square, which often matters more than the door itself.
Hardware and Hinge Correction
Loose builder-grade hinges and short strike-plate screws cause most interior door sag in Manor tract homes. We replace hinge screws with longer fasteners into the king stud, not just the jamb. The door stays put through seasonal movement.
Interior Door Installation in Manor
Interior Door Installation in Manor covers new construction punch-list work and remodels, not just replacements. This means hanging doors that were never installed, fixing hinge mortises that were routed too deep by a production crew, or adding doors to a garage conversion or ADU. Manor’s building department requires permits for structural openings, and we pull them. No shortcuts.
New interior door installation in Manor runs $420 – $940 per door, including casing and hardware. Custom sizes, pocket doors, and barn-door hardware push toward the higher end. If a homeowner wants a specific ViewLux or Therma-Tru interior product, we can order it, but most Manor installs use solid-core MDF or pine with painted finishes that handle humidity swings better than cheap fiberboard.
New Construction and ADU Doors
Garage conversions and ADUs are popping up across Manor, and they need interior doors that meet current fire-separation codes where applicable. We coordinate with the permit office on required ratings before ordering. A 20-minute fire door costs more than a standard slab, and there’s no point buying the wrong one twice.
Pocket and Barn Door Installations
Modern farmhouse builds on Manor’s periphery often spec pocket doors. We install the track, set the door, and adjust the soft-close so it doesn’t slam when the AC kicks on. Pocket door hardware fails fast if the framing isn’t reinforced; we check that before the drywall went up, or work around it after.
Trusted Brands We Service in Manor
Juniper Windows Austin installs and services doors from Therma-Tru, PGT, and ViewLux, and we keep common hardware and weatherstripping in stock for Manor jobs. If your Therma-Tru fiberglass entry door has started binding after a dry summer, we can usually pull the spec sheet and match the threshold without waiting on a distributor. Same goes for PGT impact-rated exterior doors on homes near open pasture where wind-driven debris is a real concern. Sourcing the right door for Manor means accounting for sun, clay, and sudden storms. We’ve seen all three in one week.
Common Door Replacement Problems We See in Manor Homes
- Hollow-core interior slabs warping in the first summer. East-side Manor production homes from the 2010s boom often used the cheapest interior slabs available. By August, top-corner gaps leak conditioned air and the door won’t stay latched.
- Clay soil throwing frames out of square. Drought shrinks Manor’s clay-rich soil, foundations shift, and a door that hung perfect in January rubs the jamb by late summer. Re-shimming is part of our standard replacement, not an add-on.
- Builder-grade hinges and strike plates loosening. Tract homes often get short screws into soft jamb material. The door sags, the latch won’t engage, and homeowners think they need a new door. Often they need longer screws into the king stud and a hinge reset.
- Fiberglass entry doors binding at the strike plate. On tight Briarcroft lots and older grid streets near downtown Manor, we see Therma-Tru and similar fiberglass entries warp just enough after drought to catch. The fix is usually a combination of hinge adjustment and a composite jamb that resists moisture movement better than wood.
Pricing for Door Replacement in Manor, TX
A typical interior door replacement in Manor runs $380 – $820 for a solid-core slab with hardware, and $600 – $1,100 for a pre-hung unit with a new jamb. Exterior pre-hung doors, especially fiberglass or impact-rated, run $1,200 – $2,900 installed, depending on size, glass, and whether we’re rerouting electrical or fixing a rotted sub-sill. The biggest cost variable in Manor is what we find when the old door comes off: a racked frame, termite damage at the threshold, or a rough opening cut too wide by a production crew. We quote it after we see the opening, and the written price locks it in. No change orders. Call (325) 420-1750 for a free estimate.
We Also Serve Cities Near Manor
Our Door Replacement in Manor crews regularly serve homeowners in Austin, Cedar Park, Buda, and Lockhart. Same written pricing, same 365-Day Done Right Promise, same live person answering the phone. If you’re just outside Manor and wondering whether we cover your street, call and ask. We’ll tell you straight.
Serving Manor, TX - Our Local Coverage Area
We’re based in the Manor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Manor
Homes in Manor’s historic downtown overlay district may require design review before a street-facing exterior door replacement, especially if the new door changes the facade character or material. Newer subdivisions off 973 typically only need a straightforward building permit for structural changes, which we pull and close out. We handle both, and we can tell you which process applies to your address before we quote. Call (325) 420-1750 if you want a fast answer for your specific street.
For a shared wall or party-wall condition in an older Manor duplex, yes, you generally need to give notice or coordinate access if the jamb is embedded in a common wall. We’ll let you know exactly what’s required once we see the property. On tight lots where staging space overlaps a neighbor’s driveway, we coordinate before we arrive, not after we’ve blocked them in.
Yes. On tight Manor lots, we stage materials on wheeled carts along the curb and keep cutting inside with a HEPA vac so we’re not spraying sawdust toward your neighbor’s stucco. We plan access before we arrive and typically finish before sound ordinances kick in. If your lot line is tight, tell us on the call and we’ll route the job accordingly.
Foundation movement on Manor’s clay soil is the usual culprit. Dry summers shrink the soil, the slab shifts, and the door frame drifts out of square. The latch stops hitting the strike plate. We fix it by re-shimming the frame and hanging the door to account for seasonal movement, not by forcing the hardware. That’s the difference between a door that works for one winter and one that holds through a decade of drought-rain cycles.
Yes, we replace and repair builder-grade doors on Manor production homes, even when the original low-cost slab or hardware failed inside the builder’s warranty window. We document everything with photos and written notes so you can pursue the builder if that’s an option, and we quote the replacement separately so you’re not waiting on a claim. A door that warped in its first Manor summer isn’t something you should live with until a warranty rep answers.
Written by Sean Mackey, Owner at Juniper Windows Austin, serving Manor and the surrounding area.
Six Reasons Homeowners Choose Juniper Windows Austin
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.