New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Door Replacement Across Wells Branch
Door replacement in Wells Branch is not a one-size-fits-all job. On a 1980s ranch off Merrilltown Drive, the original door’s stile and rail widths have to match what Wells Branch MUD’s architectural review committee will approve. On a newer infill build near Wells Branch Parkway, you’re likely looking at a full-frame replacement to meet current energy code. We handle both, and we file the submittal paperwork before demo so you’re never staring at a plywood-covered opening. Call (325) 420-1750 and we’ll walk you through what your specific street requires.
Why Juniper Windows Austin Is Wells Branch’s Preferred Door Replacement Company
Wells Branch homeowners call us because we know the MUD’s architectural review process cold. We file submittal packets three weeks before demo day. We know which stile and rail profiles pass on a 1978 brick veneer ranch versus a 1995 two-story. And when the committee flags something, we fix the drawing, not the door sitting in your garage. Sean Mackey runs the Austin office that dispatches crews to Wells Branch, and his standard has not changed since 2001: a written price before any work starts, and a 365-Day Done Right Promise covering parts and labor in writing. No estimate that morphs into a surprise invoice at the door.
Our Door Replacement team works in Wells Branch every week. We stock common Therma-Tru and ViewLux components in the Austin warehouse, so a hinge color or threshold profile that matches your existing trim doesn’t require a six-week factory order. That matters when the MUD approval window is short and the weather turns.
Door Installers in Wells Branch
Door installers in Wells Branch handle two very different housing stocks, sometimes on the same street. The 1970s through 1990s sections are mostly original aluminum sliding glass doors and single-pane entry doors with failed seals. The newer infill around Wells Branch Parkway is double-pane vinyl or fiberglass, where failures are less about seal rot and more about installer error or code-driven full-frame swaps. We do both.
Entry Door Replacement
A typical entry door replacement in Wells Branch runs $1,800 to $4,200 installed, depending on whether it’s a slab swap or a full-frame replacement. Slab swaps on a 1980s ranch with an intact frame land at the lower end. Full-frame work, which the MUD sometimes requires if the rough opening no longer matches the original door’s profile, pushes toward the higher end.
Patio and Sliding Glass Door Replacement
Sliding glass door replacement in Wells Branch typically runs $2,400 to $5,800. The older aluminum sliders have narrow stiles that the architectural review committee expects you to match, which narrows your product options. Therma-Tru and ViewLux both make replacement sliders with sightlines close enough to pass MUD review without a variance hearing.
Door Contractors in Wells Branch
Door contractors in Wells Branch have to be paperwork people as much as installers. The MUD’s architectural review committee meets on a set schedule, and a submittal that misses the deadline by a day tacks anywhere from two to three weeks onto the calendar. We build that review time into the schedule before we ever order the door, so the install date you get is the date it happens.
MUD Submittal and Approval
Our crew files the Wells Branch MUD submittal packet: door elevation drawings, color chips, material spec sheets, and wind mitigation documentation where it applies. We handle the revisions. If the committee rejects a 6-inch bottom rail because the original was 4 inches, we redraw it and resubmit. You don’t chase the committee.
Scheduling Around Approval
We schedule the door order and the review in parallel. The door arrives in the Austin warehouse while the MUD reviews the drawings. Demo day gets set for the week after approval. The wall never sits open. This is the part of Wells Branch door replacement that general contractors from outside the area routinely get wrong.
Trusted Brands We Service in Wells Branch
We install and service Therma-Tru, ViewLux, PGT, and CGI doors in Wells Branch. Fiberglass entry doors from Therma-Tru hold up well under Central Texas UV, and ViewLux sliding doors give you the narrow sightlines the MUD wants on older ranch homes. PGT and CGI impact-rated units matter here if you want the wind mitigation credit on your homeowners policy. The Austin warehouse stocks common components for all four, so a replacement threshold or hinge assembly for a Wells Branch job doesn’t wait on a freight truck from Florida.
Common Door Replacement Problems We See in Wells Branch Homes
- Original aluminum frames with hail dents on west-facing exposures. Spring storms off the Balcones Escarpment hit west-facing doors hard. The dents are usually cosmetic, but bent corners on the interlock rail stop the door from sealing, and that is a functional failure.
- Failed insulated glass seals on original single-pane and early double-pane doors. The Texas sun bakes the sealant until the argon leaks out and the glass fogs. On a 1980s slider, replacing the glass sometimes costs more than replacing the whole door.
- MUD submittal rejections for altered stile and rail widths. A homeowner buys a fiberglass door with a wider bottom rail than the original, files the submittal, and gets a rejection letter. That is a two-week delay that could have been avoided by checking the original spec first.
- Wrong SHGC on a north-facing door. A low SHGC low-E coating on a north door blocks the winter sun that used to warm the entry. The door feels cold all winter and the heating bill climbs in a home originally designed for passive gain.
Pricing for Door Replacement in Wells Branch, TX
Door replacement in Wells Branch runs from about $1,800 for a basic entry slab swap to roughly $5,800 for a full-frame patio slider with impact-rated glass. Entry doors with sidelites and a full-frame rebuild fall in the $3,200 to $4,200 range. Full-frame replacement adds $800 to $1,600 over a slab swap because the rough opening gets rebuilt and reflashed. MUD submittal and architectural review is included in our written quote, not a line-item surprise. Call (325) 420-1750 for a written price before any work starts.
We Also Serve Cities Near Wells Branch
Our Austin-based crews work throughout Door Replacement in Wells Branch and the surrounding area. We regularly take door replacement projects in Austin, Cedar Park, Lockhart, and Lakeway. If you’re just north of the MUD boundary or out toward 620, call and ask whether we’re in your neighborhood this week.
Serving Wells Branch, TX - Our Local Coverage Area
We’re based in the Wells Branch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Wells Branch
Plan for two to three weeks of review time on top of the door order lead time. We file the submittal before we order the door, run the two timelines in parallel, and schedule demo for the week after approval. Call (325) 420-1750 and we’ll give you a written schedule that includes the MUD review dates.
The MUD’s architectural review committee expects replacement doors to match the original door’s stile and rail widths, panel profile, and color family. Earth tones, white, and natural wood stains typically pass without comment. Bold or modern slab doors usually require a variance hearing. We pull the original door’s specs from the home’s existing records before we spec anything.
Not always. If the frame is square and the rough opening still matches the original spec, a slab swap is usually enough. If the hail dented the frame or the rough opening has shifted from decades of Texas clay soil movement, a full-frame replacement is the right call. We’ll tell you which one you need after we inspect it. Estimates are free.
Yes, and the documentation is the part most installers skip. A wind mitigation report for an impact-rated door can reduce your windstorm premium, but only if the paperwork is filed correctly. We include the wind mitigation documentation with the MUD submittal packet so both boxes get checked at once. Call (325) 420-1750 and ask us to walk you through it.
For Wells Branch’s intense sun, a SHGC between 0.25 and 0.35 is the sweet spot for a south- or west-facing door. North-facing doors should sit closer to 0.40 or above so you don’t lose the passive solar gain the original home was designed for. The direction of the door matters more than most people think, and it changes which glass package we spec.
Call Juniper Windows Austin at (325) 420-1750 for a free door replacement estimate in Wells Branch. Sean Mackey’s team answers the phone, schedules the MUD submittal, and locks your price in writing before a single screw turns.
Written by Sean Mackey, Owner at Juniper Windows Austin, serving Wells Branch door replacement under the 365-Day Done Right Promise since 2001.
Six Reasons Homeowners Choose Juniper Windows Austin
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.