New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Installation Across Shady Hollow
Our Window Replacement in Shady Hollow runs $450 – $1,250 per window for a standard vinyl retrofit, and $900 – $2,400 per opening when the job requires full-frame replacement with new flashing and trim. Most Shady Hollow homes were built between 1970 and 1995, which means many original aluminum frames are now failing, sweating, or corroded beyond simple repair. Our crews know the streets off Brodie Lane and Escarpment Boulevard well because we work them constantly. If you’re tired of fogged glass or windows that stick after every rain, call (325) 420-1750 for a free estimate with a written price before anything starts.
Why Juniper Windows Austin Is Shady Hollow’s Preferred Window Installation Company
Shady Hollow homeowners call Window Installation teams like ours because the houses here punish sloppy work. Original aluminum frames on 1980s ranch homes corrode in our humidity, and the Hill Country clay shifts enough to throw rough openings out of square by a quarter inch or more. We handle that every week.
Sean Mackey, who leads Juniper Windows Austin, built a process around one thing Shady Hollow’s HOA reminds every homeowner: window work visible from the street requires architectural review. We pre-file drawings that match the neighborhood’s approved frame colors and grid patterns, so the review doesn’t stall your project for weeks.
Our Shady Hollow customers tell us the same thing: they want a live arrival time they can track, photo updates, and a locked price. We deliver exactly that. Every job gets a written quote before a single screw turns, and every installation carries the 365-Day Done Right Promise in writing. A real person answers the phone 24/7 at (325) 420-1750.
Window Contractor in Shady Hollow
A Window Contractor in Shady Hollow does more than swap sashes. We pull the old unit, inspect the rough opening, repair any rot or framing damage hiding behind the trim, flash the opening correctly, and set the new window square in all four corners. For Shady Hollow’s 1970s – 1990s homes, that opening step is where the real cost lives. Expect to pay $450 – $900 per window for a like-for-like retrofit with no framing surprises, or $900 – $1,900 per opening when sill and jamb repair are needed. Full-frame replacement on a two-story limestone veneer home, where ladder access is tight and HOA review applies, can reach $2,400 per opening when custom flashing and re-squaring come into play.
Full-Frame Replacement vs. Retrofit
Retrofit means we set a new window into the existing frame, which works when the original frame is still square and dry. Full-frame means we pull everything down to the studs. On Shady Hollow’s north-facing lots, where water sits in the shade and wood rot hides behind old aluminum, retrofits often aren’t an option once we see what’s behind the trim. We’ll show you photos before recommending either path.
When the Opening Isn’t Square
Clay soil moves here. Mature oaks drink the moisture and shrink the soil in summer, then heavy rains swell it back. That cycle warps rough openings over decades. When we re-square with treated lumber and shims, the new window actually operates the way it should, instead of binding on the latch side by August.
Window Installers in Shady Hollow
Window Installers in Shady Hollow face two problems most crews in flat, open neighborhoods never see: steep lots that block ladder access, and HOA rules that trip up anyone who skips the paperwork. Our installers carry scaffolding and boom equipment on the truck for second-story work on homes along Brodie Lane and the shaded streets off Copano Drive. We’ll plan the crew size and access route before the day starts, not after the install is half done.
Getting a Written Price Before Work Begins
You get a line-item quote, not a ballpark. Every window, every flashing detail, every permit line is broken out in writing. If we open the wall and find rot or failed flashing, we show you photos and get approval before spending another dollar. No surprise invoice at the end.
Access and Equipment on Steep Lots
Many Shady Hollow homes sit on heavily treed lots with limited side clearance. A crew trying to muscle a 75-pound impact window up a ladder on a 25-degree slope ends up twisting the frame or scarring the brick veneer. We bring scaffolding and a lift when the slope demands it. The equipment is part of the quote, not an add-on.
Trusted Brands We Service in Shady Hollow
We install PGT impact-rated windows and doors, CGI products for maximum storm protection, and CWS for homeowners who want solid mid-range vinyl with better thermal performance. We keep common replacement parts for these lines stocked locally, which means less waiting when a sash or latch needs to match an existing product. Because Shady Hollow falls in a hail-prone corridor, many homeowners choose PGT or CGI for impact-rated glass, built to resist wind-borne debris without shattering. We’ll help you compare U-factor and solar heat gain for each line, then price them side by side in the written estimate.
Common Window Installation Problems We See in Shady Hollow Homes
- Failed seals on original double-pane units. The aluminum spacers in 1980s windows corrode in our humidity, and the telltale sign is fog between the panes on cool spring mornings. That’s not a leak, it’s a dead seal, and the fix is replacement, not caulk.
- Wood rot behind aluminum frames. Water finds the gap where the aluminum met wood, especially on shaded, north-facing lots off Copano Drive and around the greenbelt. A sash-only swap turns into sill and jamb reconstruction once the old frame comes out, so we inspect first and tell you what’s behind the trim before quoting.
- Out-of-square rough openings from shifting clay. The limestone-rich soil expands and contracts with every wet-dry season, slowly racking window openings. New windows set into a racked opening will bind in two years, which is why our crews re-square with treated lumber on most full-frame jobs.
- HOA-driven stop-work and re-installs. The Shady Hollow Homeowners Association enforces architectural review for any window change visible from the street. A contractor who skips the filing wastes weeks and costs you a second install with different grid patterns. We pre-file drawings that match the neighborhood’s required frame color and grid pattern before ordering a single unit.
Pricing for Window Installation in Shady Hollow, TX
A typical single-hung vinyl retrofit in Shady Hollow runs $450 – $700 per window. Double-hung retrofits range from $550 – $900. Casement windows, which need more hardware and tighter flashing, sit between $700 and $1,200 per unit retrofitted. Full-frame replacement on any style adds $200 – $500 per opening for trim, flashing, and insulation. Impact-rated PGT or CGI units add 25 – 40% over the base window cost. What moves the number most is what we find when we pull the old frame: rot, undersized framing, or an opening that needs re-squaring. We build an allowance into your written quote for those repairs, and nothing gets spent without your approval. Call (325) 420-1750 for a free estimate. You’ll know the number before we start, in writing.
We Also Serve Cities Near Shady Hollow
Our crews cover Shady Hollow daily, and we regularly handle Window Installation work in Austin, Cedar Park, Lockhart, and Lakeway. The same written pricing, live arrival times, and 365-Day Done Right Promise apply everywhere we work.
Serving Shady Hollow, TX - Our Local Coverage Area
We’re based in the Shady Hollow area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Shady Hollow
You’ll add roughly 2 to 4 weeks before installation can start, because the Shady Hollow Homeowners Association requires architectural review for any window change visible from the street. We pre-file drawings that match the neighborhood’s approved frame colors and grid patterns, which keeps the review moving and avoids a re-install. Call (325) 420-1750 and we’ll pull the filing together for your specific lot and elevation.
That’s a failed seal. The original aluminum spacers in 1980s windows corrode fast in our Hill Country humidity, and once the desiccant is saturated, the fog appears every cool morning. There’s no reliable repair for a failed seal, so the window gets replaced. That’s one of the most common calls we take in Shady Hollow. We can confirm with a moisture meter and a quick pressure check during a free estimate.
In many cases yes, but the exact discount depends on your carrier and policy. We provide the documentation your insurer needs, including the product’s impact rating and the installation date. Most Shady Hollow homeowners see a reduction when moving from original single-pane aluminum to impact-rated PGT or CGI glass. Ask your agent about the windstorm credit, then bring us the paperwork.
Yes. We don’t touch the brick veneer unless the opening is so racked that the new frame can’t sit square. Instead, we re-square the rough opening from the inside with treated lumber and custom shims, then flash and set the new unit. We do this on most full-frame jobs in Shady Hollow because the clay soil has moved nearly every 30-to-40-year-old opening at least a little.
For a like-for-like replacement using the same opening size, you typically don’t need a building permit. But Shady Hollow’s HOA architectural review still applies if the windows face the street. If we find damage requiring structural repair, or if you’re enlarging an opening, that changes the picture. We handle the permit and the HOA filing either way, and both are line items on your written quote.
Written by Sean Mackey, Owner at Juniper Windows Austin, serving Shady Hollow with written pricing and the 365-Day Done Right Promise.
Six Reasons Homeowners Choose Juniper Windows Austin
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.