New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Door Replacement Across Buda
Door replacement in Buda typically runs $1,100 – $5,800 for a standard exterior unit installed, with most homeowners spending around $2,400 for a fiberglass or steel front door. Interior door replacement lands between $350 and $900 per door including slab, hardware, and labor. If you’re on Main Street near the historic district or out in Sunfield with a slab-on-grade production home, the numbers shift based on framing condition, permit requirements, and the product line you choose. Our crews know Buda’s housing stock block by block, and we’ll give you a written price before anything gets touched. Call (325) 420-1750 to schedule a free estimate, and a real person picks up, any hour.
Why Juniper Windows Austin Is Buda’s Preferred Door Replacement Company
Juniper Windows Austin is led by Sean Mackey, and his team has been replacing doors across Buda long enough to know exactly what hides behind the trim in a 1920s pier-and-beam bungalow versus a 2018 Sunfield tract home. That matters more than most people realize. The pre-1985 houses near Main Street often carry undersized or termite-chewed jamb framing, and the newer subdivisions frequently have builder-grade doors with no sill pans and no backdam flashing. We’ve seen both, repeatedly, and we plan for them in the written estimate instead of acting surprised halfway through the job.
Buda homeowners consistently mention three things when they call us back: the price they signed is the price they paid, the technician arrived with a live arrival time they could track, and the work held up through a full Hill Country storm season. We answer the phone 24/7, every job gets before-and-after photos, and the 365-Day Done Right Promise covers parts and labor in writing for a full year. Scheduling and dispatch are coordinated from our Austin office, which means our crews reach Buda quickly without you having to wait on a distant branch.
Every door we install, whether it’s a Door Replacement on a 1910 original or a slab swap in a three-bedroom off FM 2001, gets the same treatment: a written price, a permit checked against Buda’s building inspection requirements, and a line-by-line explanation of what we found and what we’re doing about it. No vague allowances, no surprise add-ons at the door.
Door Frame Repair in Buda
Door frame repair in Buda typically costs $250 – $900 when we’re dealing with localized rot, a split jamb, or an out-of-square rough opening on a slab home. The job involves pulling the casing, assessing the structural lumber behind it, cutting out damaged sections, and rebuilding the opening so a new door swings true and latches without a fight. Buda homeowners need this when doors start dragging on thresholds, when locks stop aligning, or when visible rot appears at the base of an exterior jamb after a wet spring.
Rotted Sill and Jamb Replacement
Older Buda homes near Main Street shed roof water straight onto doorway thresholds during downpours that roll off the Hill Country. When the sill is soft to the touch or the bottom corner of the jamb crumbles with a screwdriver poke, the fix means removing brickmold, cutting away the decayed material, and sistering in pressure-treated lumber or a PVC jamb that won’t absorb moisture the same way. We price this per linear foot of damage, and we write the number down before we start.
Out-of-Square Openings on Slab Foundations
Fast-built 2000s subdivisions around Buda settle, and when a slab shifts even a quarter inch, a formerly square door frame goes parallelogram. A new door installed into that opening will bind, rub, or refuse to latch. We rebuild the rough opening with shimmed king and jack studs, correct the reveal, and then set the door. If the slab movement is ongoing, we’ll tell you that plainly rather than install something that will fail again in two years.
Interior Door Replacement in Buda
Interior door replacement in Buda runs $350 – $900 per door for a standard prehung unit, with hollow-core doors at the low end and solid pine or glass-panel doors pushing the top of the range. The work includes removing the old slab and jamb, installing the new prehung door with shims and levels, adding casing, and swapping or reusing hardware. Buda homeowners ask for this when a kid’s fist goes through a hollow-core bedroom door, when a pocket door leaves its track for the last time, or when new flooring raises the slab and the old doors no longer clear the threshold.
Prehung Door Installation
Most interior replacements in Buda are done as prehung units, which include the slab already mounted on a jamb. That’s the right call when the existing frame is tired, split, or never sat square in the first place. We set the unit with shims, check it with a four-foot level, and adjust until both reveals are even. Takes about two hours per door in a typical Buda home, less if we’re doing three or four at once.
Slab-Only Replacement
When the existing jamb is solid and square, we can hang a new slab in the old frame. That cuts material cost and keeps the original trim untouched, which matters in older Buda houses where the casing profiles are no longer manufactured. We’ll mortise the hinges, drill the lockset, and trim the bottom to clear carpet or tile. A slab-only swap in Buda runs $200 – $450 per door depending on the slab material and hardware you pick.
Trusted Brands We Service in Buda
We stock and install Therma-Tru, PGT, and ViewLux for Buda homes, which covers everything from a fiberglass front door that mimics a 1920s wood original to an impact-rated unit built for hail season. If you need a door that matches the wavy-glass character of an older Main Street house, we’ll spec a Therma-Tru with a custom glass insert rather than forcing a modern panel that fights the architecture. For new construction and slab homes in Sunfield and Whispering Hollow, PGT and ViewLux give you low-E insulated glass and frames that don’t warp in August humidity. We keep common jamb sizes and hardware in stock for quick turnarounds in Buda, and special-order doors arrive in about two to three weeks.
Common Door Replacement Problems We See in Buda Homes
- Rotted sills on pre-1985 pier-and-beam homes. Older roofs near Main Street dump water directly onto doorways, and a sill that sits wet through every Hill Country storm will rot inside five years. The first sign is a soft or spongy threshold, and the fix almost always means reframing the bottom of the opening.
- Missing sill pans in Sunfield production homes. Builders in fast-track subdivisions often skipped pans and backdam flashing entirely, using caulk as the only weather seal. The result is air and water moving under the door on windy, rainy days, and a slow leak that damages flooring before you notice it.
- Sticking doors from slab settlement. In fast-built 2000s neighborhoods, slab movement gradually turns door frames from rectangles into trapezoids. The door drags at the top corner, rubs the latch side, and eventually won’t close at all. A new slab alone won’t fix it; the rough opening needs correction first.
- Failed builder-grade weatherstripping. The original vinyl or aluminum doors in older Buda subdivisions lose their seals under intense summer UV and high humidity. You’ll feel drafts around the door even when it’s latched, and your cooling bill shows it. A replacement with fresh compression weatherstripping and a proper sweep resolves it.
Pricing for Door Replacement in Buda, TX
Exterior door replacement in Buda runs $1,100 – $5,800 installed. A basic steel front door starts around $1,100, a fiberglass Therma-Tru with glass and a low-E insert lands at $2,200 – $3,400, and an impact-rated PGT unit built for hail and wind runs $3,800 – $5,800. Interior doors cost $350 – $900 each installed. Door frame repair runs $250 – $900 depending on how much structural lumber needs replacing. If your home is pre-1985 and Buda’s building inspection office requires a permit for the frame work, the permit fee is a line item on your written estimate, not a surprise later. Material, labor, permit, and any framing correction all appear in the number you sign before we start. Call (325) 420-1750 for an exact quote on your Buda door, and you’ll get a written price, not a ballpark.
We Also Serve Cities Near Buda
Our crews cover Door Replacement in Buda and the surrounding communities, including Austin, Lockhart, Manor, and Cedar Park. If you’re just outside the Buda city limits, call (325) 420-1750 and tell us where you are. We’ll confirm coverage and schedule from our Austin office while your local crew handles the work.
Serving Buda, TX - Our Local Coverage Area
We’re based in the Buda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Buda
Buda’s building inspection office requires a permit when opening walls or replacing door framing in homes built before 1985, even if the door slab itself is a simple swap. If the work is limited to a slab-only replacement with no framing touched, the permit requirement generally doesn’t trigger. We check your home’s year and the scope of work before we quote, and the permit fee is a written line item you approve in advance. Call (325) 420-1750 and we’ll tell you exactly what applies to your Buda address.
The most common cause in Sunfield is slab foundation settlement, which gradually shifts a doorway from square to slightly out of square. A door that once latched cleanly will start dragging at the top corner, then rub hard enough that you have to shoulder it open. The fix is correcting the rough opening with shims and sometimes reframing the jamb, not just planing the door. We’ll measure the opening, tell you if the slab is still moving, and price the correction in writing before any work starts.
You don’t have to use anything specific, but Therma-Tru is the line we most often recommend for older Buda homes because their fiberglass slabs can be ordered with wood-grain texture, custom glass, and panel profiles that read as period-appropriate from the street. A 1920s home with original wavy glass doesn’t need a vinyl replacement that looks out of place; you can get a thermally efficient fiberglass door with a divided-light insert that keeps the character. We’ll show you options in the estimate, and the price is in the written quote either way.
We inspect the opening before we write the estimate, and in Buda’s pre-1985 pier-and-beam homes we look specifically for undersized or termite-damaged jamb framing. If we find rot after the casing comes off, our written estimate already includes a framing allowance for Buda’s typical failure modes, and any additional work is priced and approved in writing before we touch it. The substitute for that process is a contractor who discovers rot, shrugs, and sends a revised invoice at the end. That’s not how Juniper operates.
Yes, and in Buda’s specific climate the biggest driver is air sealing rather than the door’s thermal rating alone. A properly installed exterior door with fresh compression weatherstripping, a corner seal pad, and a sill pan that blocks wind-driven rain removes the gaps where conditioned air escapes. In Buda’s humid August afternoons, a door with low-E insulated glass also cuts radiant heat gain directly into the foyer. We’ll give you the U-factor on any door we quote, and we’ll install it so the weatherstripping actually does its job. Call (325) 420-1750 for a free estimate, and ask us to check your current door’s air leaks while we’re there.
Written by Sean Mackey, Owner at Juniper Windows Austin, serving Buda and the surrounding Hill Country communities.
Six Reasons Homeowners Choose Juniper Windows Austin
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.