New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Door Replacement Across Lockhart
Door replacement in Lockhart runs $850 to $4,200 for most homes, depending on whether you’re swapping a standard interior slab or having a custom-fabricated entry door milled for a 1910 Victorian jamb. That’s the honest spread. We’re Juniper Windows Austin, and our Door Replacement team works across Lockhart weekly, from the historic district off San Antonio Street to newer builds near City Park. When you call (325) 420-1750, a real person picks up and schedules a free estimate with a written price before any work starts.
Lockhart doors aren’t like doors in Buda or Georgetown. Many pre-WWII homes here have non-standard rough openings. Big-box slabs don’t fit. We know this because we’ve measured and milled for those jambs. The right door for a Lockhart house has to handle August humidity, spring storm fronts, and a jamb that hasn’t been square since Calvin Coolidge was president.
Why Juniper Windows Austin Is Lockhart’s Preferred Door Replacement Company
Lockhart homeowners call us because we don’t treat a 1905 bungalow like a 2010 track-home build. Our techs have measured door openings on Caldwell Street, Commerce Street, and the neighborhoods around Lockhart State Park. We know what’s behind those walls. When we replace a door in Lockhart, we check the jamb for rack and rot before we order anything. That matters here.
Every job gets the same treatment from founder Sean Mackey’s team: background-checked technicians in uniform, a written price locked before ordering, and the 365-Day Done Right Promise in writing. If a hinge binds or a threshold settles within a year, we come back and fix it. Parts and labor. No charge. That’s not marketing language. That’s the contract.
We also answer the phone. Live, 24/7. You won’t get a voicemail maze when you call (325) 420-1750 on a Tuesday evening to ask about a sagging exterior door.
Interior Door Installation in Lockhart
Interior Door Installation in Lockhart covers everything from swapping a hollow-core slab in a mid-century ranch near City Line Road to hanging a solid wood door with period-appropriate hardware in a Victorian near the Caldwell County Courthouse. Most Lockhart interior door projects run $350 to $1,850 per opening, installed. Pre-hung doors are more, custom-milled slabs for non-standard jambs top the range.
Older Lockhart homes rarely have plumb, square openings. That’s not a defect. It’s just what happens when a house has been settling for 90 years. So we don’t force a standard door into a non-standard jamb. We measure, square up or plane as needed, and hang the door so it closes with one finger and no daylight showing through the stops.
Custom-Sized Slabs and Trim Matching
When an interior opening is 2’8″ by 6’9″ instead of the modern 2’10” by 6’8″, you don’t shim it and hope. We order a custom slab, machine the hinge mortises on site, and match the existing trim profile or mill new trim from the same wood species. That keeps a 1930s hallway looking like a 1930s hallway.
Door Hardware and Swing Direction
Swapping a bedroom door’s swing direction can change how a Lockhart hallway functions. We can rehang doors to open the other way, install mortise locks with restored original hardware, or fit modern smart locks that don’t leave ugly plates on vintage doors.
Door Installers in Lockhart
Door Installers in Lockhart who understand historic framing are not the same as installers who only work new construction. Our crews serve Lockhart directly and have fit doors into frames that predate standardized lumber dimensions. A standard single-entry door installation in Lockhart typically runs $1,200 to $3,600 including the door, weather stripping, and installation. Custom entries with sidelights or transoms run $3,800 to $9,500, depending on glass and millwork.
We recently replaced the front entry on a 1910 Victorian off San Antonio Street. The original door measured 3’1″ by 6’10”. Nothing off the rack fits that opening. Our techs fitted a custom Therma-Tru door with a laminated glass interlayer for thermal performance and preserved the original transom by reglazing it with low-E glass. The result cleared design pressure requirements for wind-driven rain without changing the home’s proportions. That’s the kind of door work Lockhart throws at you, and the kind we’re built for.
Custom Jamb Fabrication
When a jamb is too far gone to save, we don’t just cram in a pre-hung unit and caulk the gaps. For historic Lockhart homes we can fabricate a new jamb to match the original profile and set it square so the new door won’t sag or bind. That’s the difference between a door that lasts five years and one that works quietly for thirty.
Threshold and Threshold Support
Lockhart’s heavy spring rains find every gap. We install composite thresholds with double-fin weather seals and repair the sub-threshold framing underneath. If the old sill plate has rot from decades of wind-driven rain, that gets replaced before the new door goes in. You shouldn’t be able to see daylight under your front door during a thunderstorm.
Trusted Brands We Service in Lockhart
We work with eight product lines, so a Lockhart home gets the right door, not whatever’s left in a warehouse. For high-end Lockhart work we rely on PGT for impact-rated glass, Therma-Tru for fiberglass entry systems that stand up to Texas humidity, and CWS for commercial-grade stiles and frame profiles. We stock replacement weather stripping, hinges, threshholds, and astragals for these brands so Lockhart customers aren’t stuck waiting on a freight shipment. For a Victoria-era home near the historic courthouse, we can pull a Therma-Tru door with a laminated interlayer that meets wind-borne debris standards and still looks like a wood door from five feet away.
Common Door Replacement Problems We See in Lockhart Homes
- Non-standard rough openings in pre-WWII frames. A 3’0″ door slab from the home center won’t fill a 3’1″ opening without an ugly filler strip and a permanent draft. We see this on nearly every project in the historic district.
- Skipped square-up repairs on 80-year-old jambs. If the jamb is racked or the header has settled, any new door will bind at the top corner within months. We check alignment before ordering anything.
- Impact-rated glass with the wrong laminated interlayer. Some Lockhart contractors quote an “impact-rated” door that doesn’t carry the Miami-Dade NOA for the actual door size. That’s not wind mitigation; that’s a false invoice. We verify the NOA for every panel.
- Moisture rot at the threshold from wind-driven rain. Lockhart’s spring storms push rain sideways. If the old sill pan wasn’t pitched or sealed, water wicks into the subfloor. We repair the framing and set the new threshold on a waterproof pan.
Pricing for Door Replacement in Lockhart, TX
Here’s the real market in Lockhart, TX. A basic interior slab door, installed, runs $350 to $850. A six-panel pre-hung interior door in a standard opening runs $650 to $1,250. A standard fiberglass or steel exterior door runs $1,600 to $3,200 installed. Custom entry doors with sidelights, transoms, or impact-rated glass run $4,000 to $9,500. Every price is locked in writing before Sean Mackey’s team places any materials order. No change orders. No “while we were in there” add-ons. Call (325) 420-1750 for your free estimate.
Lead times, not labor, set the calendar on custom work. A standard fiberglass door can often be in hand within a week. A custom-milled Victorian door with shop-finished wood and a laminated interlayer? That’s four to eight weeks. We tell you that up front and factor it into your written price.
We Also Serve Cities Near Lockhart
Beyond Door Replacement in Lockhart, our crews cover Buda, Austin, Manor, and Cedar Park. So if you own a rental in Lockhart and live in Austin, or you’re helping family in Manor, the same written-price guarantee applies across every job. One call at (325) 420-1750 books a free estimate anywhere in that radius.
Serving Lockhart, TX - Our Local Coverage Area
We’re based in the Lockhart area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Lockhart
No, Lockhart’s building code does not currently mandate impact-rated doors in the historic district for standard residential replacement.
Most historic Lockhart homes fall under general Texas Department of Insurance wind load requirements, not the coastal Miami-Dade or HVHZ standards. However, if you’re replacing an entry on a home built before 1950, our recommendation is to use a door with either impact-rated glass or a laminated interlayer – not because code demands it, but because Lockhart’s spring storm season sends branches and debris at doors every year. We can pull a PGT or CGI product that carries a Miami-Dade NOA for your exact door size if you want the additional wind protection. Call (325) 420-1750 and we’ll pull the specific code path for your street.
Yes, we match Victorian millwork profiles on Lockhart homes by taking a physical profile of the existing trim, casing, and plinth blocks, then either sourcing a matching knife set or hand-milling replacements from matching wood species.
The key is that we don’t rip out original trim to fit a modern pre-hung unit. We set the new door within the existing jamb or fabricate a new jamb to the original profile, then match the casing to the exact width, reveal, and profile of what’s already on the house. We’ve done this on homes off San Antonio Street, Commerce Street, and around the courthouse square. If your original door is being replaced but you want to keep the transom, we reglaze the transom with low-E glass and leave the historic sightlines intact. Call (325) 420-1750 for a free on-site measurement.
We recommend Therma-Tru fiberglass doors and PGT impact-rated doors for Lockhart’s heat and humidity because both are engineered to resist warping, swelling, and seal failure in high-moisture, high-UV conditions.
Solid wood doors are beautiful, but in Lockhart’s August humidity they expand and contract. That’s why a wood door that fits perfectly in January can bind by July. Fiberglass doors from Therma-Tru carry a wider temperature tolerance and won’t delaminate in the humid season. For west-facing entries that get hammered by afternoon sun, we specify a UV-stable finish and a multi-point lock that keeps the door sealed against wind-driven rain. CWS doors are another option if you need a commercial-grade stile profile with a narrow sightline. Call (325) 420-1750 and we’ll spec the right brand for your exposure.
When an existing jamb is out of square, we don’t schedule the door delivery until we’ve measured the diagonal, checked the header for settlement, and either planed the jamb back to square or fabricated a new one to match.
Ordering a door for a jamb we haven’t verified is the fastest way to end up with a slab that binds at the top corner or gaps at the bottom. So the sequence on a Lockhart historic home is: free measurement visit, jamb assessment, material order only after the measurements are confirmed, then installation. If the jamb correction changes the rough opening dimension, the door is ordered to the corrected dimension, not the original one. That’s why our written price includes the measurement work up front. Call (325) 420-1750 to book the free measurement.
Yes, switching to a Low-E insulated impact door in Lockhart can lower cooling bills by 5 to 15 percent on a home where the old door was an uninsulated solid wood slab with single-pane glass.
The savings come from two directions: Low-E glass reflects radiant heat before it enters the house, and an insulated core stops the conductive heat gain that pours through a solid wood door on a 98-degree afternoon. On a west-facing Lockhart entry, that’s measurable. But the bigger difference is comfort – the room nearest the door stops feeling like a solar oven by 4 p.m. If you’re replacing an old solid wood door on a pre-WWII Lockhart home, the energy upgrade is real. Call (325) 420-1750 and we’ll run a door-level heat gain calculation as part of your free estimate.
Lockhart’s door problems are specific. So are our solutions. Juniper Windows Austin works throughout Lockhart with a clear scope, a written price, and a phone that a person answers. Call (325) 420-1750 to schedule your free estimate, and ask for Sean Mackey’s team when you call.
Written by Sean Mackey, Owner at Juniper Windows Austin, serving Lockhart door replacement projects with written pricing and the 365-Day Done Right Promise.
Six Reasons Homeowners Choose Juniper Windows Austin
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.