New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Austin pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Manor
Window replacement in Manor costs roughly $450 – $1,850 per opening for a standard insert, with full-frame work on older cottages running $900 – $3,200 depending on rot repair and custom trim. That’s the honest range we quote before anything is ordered. If you’re in Manor and a window has failed, fogged, or stopped sealing, call us at (325) 420-1750 and we’ll give you a written price. We know the east-side subdivisions and the downtown grid equally well, so what we quote is what actually applies to your house, not a guess from someone who rarely works this side of 290.
Why Juniper Windows Austin Is Manor’s Preferred Window Replacement Company
Manor homeowners see the same pattern over and over: a 2016 build starts fogging between the panes, or a 1930s bungalow near downtown won’t latch because the frame has shifted. We’ve walked those jobs enough times to tell the difference between a seal failure and a racked jamb from the first visit. Sean Mackey runs our crews here, and the standard he set is simple: written price first, install second.
We’re not a national chain with a rotating cast of subcontractors. Every technician is background-checked and uniformed, and you’ll get a live arrival time, photo updates of the work, and a digital invoice you can pay from a link. That’s the Relay Visibility Guarantee, and it applies to every Manor job whether it’s a single pane or a full Window Replacement across a modern farmhouse. If the work isn’t right, the 365-Day Done Right Promise covers it, parts and labor, for a full year.
Window Pane Replacement in Manor
Window pane replacement in Manor is the recurring fix for east-side homes built during the 2010s boom, where builder-grade insulated glass units fail years before they should. A single pane replacement runs $220 – $520, while an IGU with low-E coating typically lands in the $380 – $750 range installed. It’s the difference between a five-minute check and a full sash rebuild.
Failed IGU Swap
When the low-E coating degrades or the spacer seal opens, you get permanent haze between the panes. We remove the old unit, confirm the frame is still square, and drop in a new IGU sized for the exact opening. For Manor’s newer tract homes, this usually means a same-visit confirmation and a written price before the glass is ordered.
Impact-Resistant Pane Upgrades
Not every Manor house needs the upgrade, but for design pressure requirements on exposed gable ends and long interior hallways, PGT and CGI impact-rated glazing makes sense. These panes resist wind-borne debris without shattering, and we’ll tell you straight if the additional cost is justified for your floor plan.
Window Seal Repair in Manor
Window seal repair in Manor is the first thing to check when you see condensation, haze, or a milky film between panes. Seal failure itself is the classic Manor failure mode, accelerated by Central Texas heat and sustained UV exposure. Replacing a failed seal alone isn’t usually possible on modern double-glazed units; the proper fix is a new IGU, which runs $380 – $750 in Manor depending on glass package and coating.
Downtown Frame Racking
Older homes near downtown Manor sit on clay-rich soil that expands and contracts through drought and rain cycles. That movement throws window frames out of square, pinching the sash and splitting jamb seals. We re-shim and reset the frame, then reset the sash so it closes tight without forcing the latch.
Weatherstrip Renewal
When a frame has racked once, the original weatherstrip rarely bounces back. We replace it with a compression bulb that keeps conditioned air in and keeps dust from Manor’s hayfields out. It’s a small line item that measurably changes how a room holds temperature.
Trusted Brands We Service in Manor
So many Manor builders fit PGT, Therma-Tru, and ViewLux products on the front end, then homeowners are told to contact “the manufacturer” when something fails. We service all three, plus CGI, and stock the common replacement IGUs, weatherstripping packs, and latch hardware Manor houses use. If you’re not sure what’s in your wall, we’ll identify it on the first visit and quote from there.
Common Window Replacement Problems We See in Manor Homes
- Early IGU blowouts in east-side 2010s builds. Builder spec vinyl windows fail their seals within a few years under sustained heat and UV. We see this in Manor more than in Cedar Park or Buda, where housing stock is newer but shading patterns differ.
- Racked frames in the downtown grid. The clay under Manor’s older cottages doesn’t move uniformly, so doors and windows bind in dry years and sag in wet ones. Replacement that ignores the frame movement just fails again.
- Air and water intrusion on perimeter rooms. Windows that don’t meet Central Texas design pressure requirements leak at the sill and jamb during spring storms. We fix the flashing details, not just the glass.
- Fogged glass that homeowners assume needs a full tear-out. A cloudy window doesn’t always mean a failed window. The frame may be fine; the IGU is the failed component, and replacing it saves real money.
Pricing for Window Replacement in Manor, TX
Insert window replacement in Manor runs $450 – $1,850 per opening, with the higher end covering larger ganged units and impact glazing. Full-frame replacement on older homes starts around $900 and can reach $3,200 when rot repair, custom brickwork, or architectural trim comes into play. Window pane replacement is $220 – $520 for a single pane, $380 – $750 for an IGU with low-E. Long-lead items like custom sash and jamb packages set the schedule, not labor. Call (325) 420-1750 for a free estimate with a written price.
We Also Serve Cities Near Manor
Our Window Replacement in Manor work keeps our teams on the ground here weekly, and we take the same written-price standard into Austin, Cedar Park, Buda, and Lockhart. If you’re right outside Manor city limits, the trip is short and the quote is still free.
Serving Manor, TX - Our Local Coverage Area
We’re based in the Manor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Manor
They fail because builder-grade vinyl windows from the 2010s housing boom use lower-cost insulated glass units that can’t handle Manor’s sustained UV and heat load. The seal gives out early, the IGU fogs, and the fix is pane replacement, not a full window swap. Call (325) 420-1750 and we’ll confirm which you need.
You don’t need them on every window, but certain exposures in Manor benefit from impact-rated glazing: long gable ends, windows facing open pasture, and any opening where wind-borne debris is a realistic spring threat. We’ll tell you honestly where the cost makes sense. Estimates are free.
We re-shim the frame to neutralize the rack, then reset the sash and replace any broken jamb seals. The goal is a window that closes cleanly without forcing, so the replacement lasts beyond the next drought cycle. That’s standard practice on our Manor jobs.
Custom sash and jamb packages run three to six weeks in Manor right now, depending on millwork and glass spec. The price is fixed in writing before we order, so the lead time doesn’t change the invoice. That’s the Juniper standard, and it applies to every project.
On a modern double-glazed window, fog means the IGU has failed and the fix is a new IGU, not a seal repair. The frame is often perfectly fine. A full replacement is only needed if the frame is racked or rotted. We’ll point you to the right path and quote it in writing.
Get Your Manor Window Replacement Started Today
You don’t have to call three companies and hope one gives you a straight answer. Call (325) 420-1750 and we’ll schedule your free estimate, come out to Manor, and put a written price in your hands before anything is ordered. Sean Mackey and the Juniper team run every job on the Relay Visibility Guarantee: live arrival time, photo updates, and a 365-Day Done Right Promise that means exactly what it says.
Written by Sean Mackey, Owner at Juniper Windows Austin, part of Relay Home Co. since 2001.
Six Reasons Homeowners Choose Juniper Windows Austin
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.